-(2).webp){kind=logo}
Looking for masonry nails in UAE? A masonry nail is a hard steel nail made to be hammered into blockwork, brick, mortar and some concrete, so you can fix battens, conduit clips and light fittings without drilling.
Most masonry nail problems come from the wrong nail for the wall, not from a bad brand. A plain wire nail will bend in a Dubai tower slab, a hardened nail can crack a hollow block in Sharjah, and an uncoated nail rusts quickly near the coast in Ajman. Each section below gives you the exact spec to ask your supplier for.
Several listings under Masonry Nail on fyind.com are common wire nails made of mild or galvanised iron. They are fine for wood, soft mortar and light fixings, but they will bend in concrete. For blockwork and concrete, ask for a hardened steel nail and confirm the hardness, as covered below.
A masonry nail is a short, thick, heat-treated steel nail that can be hammered into hard materials such as brick, concrete block and mortar joints. The hard shank resists bending and the thick shape lets it wedge itself into the material. It holds by friction and by pushing the material aside, so it suits light and medium fixings, not heavy or safety-critical loads.
| Part | What It Does | Why It Matters in the UAE |
|---|---|---|
| Head | Takes the hammer blow and clamps the fixture | Flat or countersunk heads sit neat on battens and clips |
| Shank | The hardened body; smooth, grooved or fluted | Grooved or fluted shanks grip better in blocks |
| Point | Starts the entry into hard material | A sharp, hard point reduces bending and chipping |
| Coating | Zinc plating or galvanising | Protects against humid, salty UAE air |
| Hardness | Heat treatment of the steel | Decides whether it goes in or bends |
No, that is the point of a masonry nail: you fix with a hammer and skip drilling and plugging. For heavy loads, hollow areas or anything overhead, drill and use an anchor or concrete screw instead.
Four nail families appear under Masonry Nail on fyind.com. They look similar but behave very differently once they hit the wall.
| Type | What It Is | Best For | Watch Out For |
|---|---|---|---|
| Hardened steel (concrete) nail | Heat-treated steel, often with a grooved or fluted shank | Blockwork, brick, mortar joints, soft concrete: battens, clips, conduit | Brittle, can snap if struck badly; wear eye protection |
| Common wire nail (galvanised) | Mild steel or galvanised iron, soft and thin | Wood, plywood, soft mortar, light fixings | Bends in concrete and hard block |
| Brass nail | Corrosion-resistant, softer metal | Decorative, trim and moisture-prone joinery | Too soft for hard masonry |
| Powder-actuated nail (Hilti X-P) | Hardened nail fired by a powder-actuated tool | Concrete, steel and limestone brick at speed | Needs the tool, cartridges and trained operators |
Made from heat-treated steel so they can enter masonry without bending. Classic Metallic Sheet Factory (Sharjah) lists a hardened steel nail in lengths of 25, 30, 70 and 100 mm and nominal sizes of 2.5, 3.0 and 4.2 mm, and SM & Rahmani (Dubai) lists a 2.25 x 25 mm steel nail. These suit partition walls, conduit clips and light brackets.
Thin, soft nails sold by the kilogram or carton. Canvas General Trading (Dubai) lists a galvanised common wire nail of 17 x ½ in, New Qamar Al Huda (Dubai) lists a 1 in common nail (4 kg, SUPREME) and Al Jenaidi (Dubai) lists 16 kg cartons of wire nails in all sizes. Use them for joinery and carpentry, not for hard concrete.
Brass does not rust, so it suits visible trim and damp areas. Mufaddal Raj (Ajman) lists a brass nail. Brass is soft, so do not expect it to enter hard concrete.
Fired by a powder-actuated tool rather than a hammer. Hilti Emirates (Dubai) lists the X-P P8 universal nail in carbon steel for soft and tough concrete, steel and solid limestone brick, in the Ultimate product class. It suits fast, repeat fixings by trained crews.
Fixing wood, a conduit clip or a light bracket to blockwork? A hardened steel nail with a grooved shank. Fixing trim in damp joinery? Brass or galvanised. Making hundreds of fixings into concrete or steel on a project? Powder-actuated nails with the right tool. Fixing wood or soft mortar on a budget? Galvanised wire nails. Confirm the substrate, length, shank diameter and coating before ordering.
Before ordering masonry nails, check these details - they decide whether the nail goes in, holds and lasts.
| Specification | Options Seen on fyind.com | Why It Matters |
|---|---|---|
| Length | 25, 30, 70, 100 mm (Classic Metallic); 25 mm (SM & Rahmani); ½-4 in wire nails | Must pass through the fixture and reach about 25 mm into the wall |
| Shank Diameter | 2.5, 3.0, 4.2 mm nominal (Classic Metallic); 2.25 mm (SM & Rahmani) | Thicker nails bend less and hold better |
| Material | Hardened steel; carbon steel (Hilti X-P P8); galvanised iron (wire nails); brass | Hardness and corrosion resistance |
| Coating | Galvanised (Canvas wire nail); zinc and others on request | Rust protection in humid and coastal air |
| Shank Type | Smooth or grooved shanks are common on masonry nails | Grooved or fluted shanks grip blocks better |
| Packaging | 4 kg, 16 kg and 20 kg cartons; 50 pcs per pack; boxes for powder-actuated nails | Quantity and cost per piece |
| Base Material (Hilti X-P P8) | Soft and tough concrete, steel, solid limestone brick | Check it matches your wall |
| Documents | Data sheet, material or hardness details, origin and conformity papers | Approval and quality checks |
Which length do you need? A simple rule: fixture thickness plus about 25 mm of penetration into the wall. Values marked ~ are typical guidance, so follow the nail maker and the project specification.
| Fixture Thickness | Suggested Nail Length | Typical Use |
|---|---|---|
| ~12 mm (thin board or clip) | ~40 mm | Light clips and trims |
| ~18-19 mm (MDF or batten) | ~50 mm | Wall battens, skirting, boards |
| ~25 mm (timber batten) | ~60 mm | Furring strips and frames |
| ~38 mm (thick timber) | ~70-75 mm | Heavier timber frames |
| ~50 mm (thick timber or packing) | ~75-100 mm | Thick supports |
| Nail Size | Approx. Pieces per kg | Notes |
|---|---|---|
| 2.5 x 25 mm | ~800-900 | Light clips and small fixings |
| 3.0 x 40 mm | ~400 | General fixings |
| 3.0 x 50 mm | ~320 | Battens and boards |
| 3.5 x 70 mm | ~170 | Heavier timber |
| 4.2 x 70 mm | ~115 | Heavy timber on solid block |
| 4.2 x 100 mm | ~85 | Thick fixtures |
| 17 gauge x ½ in wire nail | ~5,000 | Light carpentry; gauge 17 is about 1.5 mm |
Aim for about 25 mm (1 in) of penetration in blockwork or brick. In very hard concrete the nail may only go in 20-25 mm, so choose a nail that does not need more. If you cannot get the nail in without it bending, stop and switch to a drilled anchor or concrete screw.
The UAE is tough on fasteners. Coastal areas in Dubai, Sharjah and Ajman bring humidity and salt air, and inside air-conditioned buildings condensation can start rust. Values marked ~ are typical industry figures.
| Material / Finish | Typical Hardness / Feature | Corrosion Resistance | Best Use |
|---|---|---|---|
| Hardened carbon steel | ~HRC 50-58 after heat treatment | Low unless coated | Blockwork and concrete |
| Galvanised (electro or hot-dip) | Zinc layer protects the steel | Good; hot-dip is best | Outdoor and damp areas |
| Zinc-plated | Thin zinc layer (a few microns) | Moderate indoors | Dry interior fixing |
| Brass | Soft, bright finish | Excellent | Decorative and moisture-prone joinery |
| Stainless steel | Rust resistant | Excellent | Pools, coastal and wet areas |
| Bright or blued steel | Uncoated or oil-finished | Poor | Temporary or dry indoor use |
For anything outdoors, in plant rooms or near the coast, galvanised nails resist rust far longer. Plain nails are fine for dry interior fixings that will be covered. Rust stains can bleed through paint and plaster, so choose the coating before you buy.
| Substrate | How a Masonry Nail Performs | Recommended Choice |
|---|---|---|
| Dense structural concrete (slabs, columns) | Poor to limited with hammer-driven nails; may bend | Powder-actuated nails (Hilti X-P type) or drilled anchors |
| Solid concrete block | Good with hardened nails | Hardened steel nail, 40-70 mm |
| Hollow concrete block | Fair; can crack faces and hold weakly | Short grooved nail in the solid edge, or a plug and screw for heavy items |
| Red clay brick | Very good with moderate hammering | Hardened steel nail |
| AAC / lightweight block | Weak hold; nails pull out easily | Fixings made for AAC, not nails |
| Cement plaster over block | Fine for light fixings, can crack plaster | Mark the spot, use a nail punch |
| Gypsum partition | Not suitable | Drywall screws |
Towers in Dubai and Abu Dhabi often use high-strength concrete that is denser than many nails can handle, while villas and warehouses in Sharjah and Ajman use cement blocks that suit hardened nails. Always test one nail before you commit to a whole wall.
| Supplier | City / Area | Nail Listed | Type | Size / Detail | Business Type |
|---|---|---|---|---|---|
| Classic Metallic Sheet Factory LLC | Sharjah | Hardened Steel Nail | Hardened steel | 25, 30, 70, 100 mm; 2.5, 3.0, 4.2 mm | Manufacturers |
| Hilti Emirates | Dubai (Dubai Investment Park 1) | Hilti X-P P8 Universal Nails | Powder-actuated | Carbon steel; concrete, steel, limestone brick; Ultimate class | Manufacturers |
| SM & Rahmani Building Materials Trading LLC | Dubai | Steel Nail | Steel nail | 2.25 x 25 mm | Suppliers |
| Al Jenaidi Building Material Trading LLC | Dubai (Deira) | Wire Nails 16 Kg All Size | Wire nail | 16 kg, in stock; all sizes | Suppliers |
| Canvas General Trading LLC | Dubai (Al Quoz Industrial Area 3) | Common Wire Nail 17 x ½ in | Wire nail | Galvanised iron, ½ in | Suppliers |
| New Qamar Al Huda Trading LLC | Dubai (Al Quoz Industrial Area 3) | Common Nail 1 in (4 kg) SUPREME | Common nail | 1 in; 4 kg | Suppliers |
| Mufaddal Raj Building Material Trading | Ajman (Al Jurf Industrial Area 1) | Brass Nail | Brass nail | Size to be confirmed | Suppliers |
Classic Metallic Sheet Factory LLC lists hardened steel nails on FYIND, with multiple length and nominal diameter options for buyers sourcing masonry fasteners. These nails may be suitable for selected fixing tasks involving masonry or concrete, subject to the nail design, substrate hardness and installation method. Confirm the exact application with the supplier before ordering.
| Specification | Available Details |
|---|---|
| Product | Hardened Steel Nail |
| Length options | 25 mm, 30 mm, 70 mm and 100 mm |
| Nominal diameter | 2.5 mm, 3.0 mm and 4.2 mm |
| Material | Steel |
| Origin | UAE |
| Business type | Manufacturer |
Ask Classic Metallic Sheet Factory LLC to confirm the available length-and-diameter combinations, hardness specifications, nail head and shank design, coating options, packaging quantity, minimum order quantity and delivery lead time. Request a quotation based on the intended application and order volume.
Supplier Enquiry: Contact Classic Metallic Sheet Factory LLC on FYIND
Hilti Emirates lists the Hilti X-P P8 Universal Nail for professional fastening applications involving specified concrete, steel and solid limestone brick substrates. Made from carbon steel and classified in Hilti’s Ultimate product class, this powder-actuated fastener is available in multiple shank lengths. Contractors should select the appropriate nail and compatible fastening system according to the base material, fixture thickness and project requirements.
| Product | Product Type | Key Details |
|---|---|---|
| Hilti X-C P8 Concrete Nails | Concrete nails | For compatible concrete fastening applications |
| Hilti X-P P8 Steel/Concrete Nails With Washer | Steel/concrete nails | Washer-equipped fastening nail |
| Hilti X-P B3 MX Concrete Nails (Collated) | Collated concrete nails | For compatible BX fastening systems |
| Hilti X-C G2 MX Concrete Nails (Collated) | Collated concrete nails | Collated fastening format |
| Hilti X-S G3 MX Collated Nails | Collated nails | Confirm substrate and tool compatibility |
| Hilti X-ENP Metal Deck Fasteners (Collated) | Metal-deck fasteners | For specified metal-deck fastening applications |
| Hilti X-C P8S Concrete Nails | Concrete nails | Check the exact variant and application |
| Hilti X EDS Steel Nails | Steel nails | For specified steel fastening applications |
| Hilti PN Hand Drive Concrete Nails With Washer | Hand-drive concrete nails | Washer-equipped; verify substrate suitability |
| Hilti X-C MX Concrete Nails (Collated) | Collated concrete nails | For compatible fastening tools |
| Hilti X-U MX Steel/Concrete Nails (Collated) | Steel/concrete nails | Collated format for compatible systems |
| Hilti X-C B3 MX Concrete Nails (Collated) | Collated concrete nails | Confirm base material and tool requirements |
| Hilti X-C P8S Concrete Nails With Washer | Concrete nails with washer | Washer-equipped variant |
| Hilti X ENP Metal Deck Fasteners | Metal-deck fasteners | Verify the exact model and intended deck application |
| Hilti X-P G2 MX Concrete Nails (Collated) | Collated concrete nails | For compatible fastening systems |
| Hilti X-U P8 Steel/Concrete Nails | Steel/concrete nails | Confirm the specified base material and application |
| Hilti X-R P8 Stainless Steel Nails | Stainless steel nails | Check corrosion requirements and compatibility |
| Hilti X-P G3 MX Concrete Nails (Collated) | Collated concrete nails | For compatible fastening systems |
| Hilti X-P P8 Universal Nails | Universal nails | Carbon steel; listed shank lengths: 22–72 mm in specified increments |
| Hilti X ENP HVB Shear Connector Nail | Shear connector nail | Specialist structural fastening application |
Before ordering, confirm stock availability for the required shank length, pack quantity, compatible fastening tool, cartridge requirements, delivery lead time and current pricing. Powder-actuated fastening should be carried out by trained operators using the manufacturer's instructions and required safety precautions.
Contact: 800 44584 | FYIND Supplier Profile: View Hilti Emirates Profile
SM & Rahmani Building Materials Trading LLC lists a Steel Nail measuring 2.25 × 25 mm on FYIND. This size may be relevant for buyers sourcing small nails for suitable light-duty fixing and joinery applications. Confirm the nail's intended use and compatibility with the material being fastened before placing an order.
| Specification | Product Details |
|---|---|
| Product | Steel Nail |
| Size | 2.25 × 25 mm |
| Supplier | SM & Rahmani Building Materials Trading LLC |
| Business type | Supplier |
| Location | Dubai, UAE |
Contact: +971 4 386 8752 | Supplier Enquiry: View SM & Rahmani's FYIND Profile
Al Jenaidi Building Material Trading LLC lists multiple wire and steel nail products on FYIND, including Wire Nails in 16 kg and 5 kg packs, Steel Nails in white finish from 1 to 4 inches, and black Steel Nails under the Stag brand in 1- to 4-inch sizes. These options give buyers a starting point when sourcing nails for carpentry, timber work and general construction applications. Confirm the exact nail size, finish and intended use with the supplier before ordering.
| Product | Listed Size / Pack | Details |
|---|---|---|
| Wire Nails – All Sizes | 16 kg | Bulk pack; confirm available nail diameters and lengths |
| Wire Nail – All Sizes | 5 kg | Smaller pack option; confirm the size range supplied |
| Steel Nails – White | 1–4 inches; 7.5 kg | White finish as listed; confirm coating and material details |
| Steel Nails – Black, Stag Brand | 1–4 inches | Black finish; pack weight not specified in the supplied details |
Before placing a bulk order, confirm stock availability, exact dimensions, material and finish, pack weight, minimum order quantity, current price and delivery arrangements. Buyers sourcing for projects in Dubai and other UAE locations should request a quotation based on the required sizes and quantities.
Contact: +971 4 228 0736 | FYIND Supplier Profile: View Al Jenaidi Profile
Canvas General Trading LLC lists common wire nails in multiple sizes on FYIND, including options from 1/2 inch to 2 inches, as well as 3/4-inch and 1-inch variants in different gauges. Its listed product range includes galvanised iron nails. Buyers should confirm the exact gauge, dimensions, coating and intended application for each item before ordering.
| Product | Listed Size | Details |
|---|---|---|
| Common Wire Nail | 17 × 1/2 inch | Galvanised iron, tip:17in, Dia: 1/2 in |
| Common Wire Nail | 17 × 3/4 inch | Galvanised iron, tip:17in, Dia: 3/4 in |
| Common Wire Nail | 17 × 1 inch | Galvanised iron, tip:17in, Dia: 1 in |
| Common Wire Nail | 17 × 1 1/4 inch | Galvanised iron, tip:17in, Dia: 1.25 in |
| Common Wire Nail | 17 × 1 1/2 inch | Galvanised iron, tip:17in, Dia: 1.5 in |
| Common Wire Nail | 17 × 2 inches | Galvanised iron, tip:17in, Dia: 2 in |
| Common Wire Nail | 16 × 1 inch | Galvanised iron, tip:16in, Dia: 1 in |
| Common Wire Nail | 20 × 1/2 inch | Galvanised iron, tip:20in, Dia: 1/2 in |
| Common Wire Nail | 20 × 3/4 inch | Galvanised iron, tip:20in, Dia: 3/4 in |
| Common Wire Nail | 20 × 1 inch | Galvanised iron, tip:20in, Dia: 1 in |
Before ordering, ask Canvas General Trading LLC to confirm stock availability for each size, pack quantity, material finish, minimum order quantity, pricing and delivery lead time. This helps contractors and procurement teams select the right nail specification for their requirements.
Contact: +971 4 286 6121 | FYIND Supplier Profile: View Canvas General Trading LLC Profile
New Qamar Al Huda Trading LLC lists a range of common nails on FYIND under the Masonry Nail category, including SUPREME common nails in several lengths and pack weights, along with China-labelled nail options. The listed products include 1-inch, 1.5-inch, 2-inch, 2.5-inch, 3-inch, 4-inch and 5-inch sizes. Buyers should confirm the exact material, nail diameter, pack quantity and intended application with the supplier before ordering.
| Product Listed on FYIND | Size / Pack Weight | Brand / Label |
|---|---|---|
| Common Nail | 1 inch, 4 kg | SUPREME |
| Common Nail | 1 inch | SUPREME NAILS |
| Common Nail | 1.5 inches, 4 kg | SUPREME |
| Common Nail | 1.5 inches, 14/16 kg | SUPREME |
| Common Nail | 2 inches, 5 kg | SUPREME NAILS |
| Common Nail | 2 inches, 16 kg | SUPREME / 14 kg net listing |
| Common Nail | 2.5 inches, 4 kg | SUPREME |
| Common Nail | 2.5 inches, 16 kg | SUPREME / 14 kg net listing |
| Common Nail | 2.5 inches, 5 kg | SUPREME NAILS |
| Common Nail | 3 inches, 4 kg | SUPREME |
| Common Nail | 3 inches, 14/16 kg | SUPREME |
| Common Nail | 3 inches | China |
| Common Nail | 3/4 inch | SUPREME NAILS |
| Common Nail | 4 inches, 4 kg | SUPREME |
| Common Nail | 4 inches, 16 kg | SUPREME |
| Common Nail | 4 inches | China |
| Common Nail | 5 inches | SUPREME NAILS |
| Steel Nail | Confirm size and pack weight | Additional listing; verify details |
Before ordering, confirm the exact size and weight combination, stock availability, minimum order quantity, current price and delivery options. New Qamar Al Huda Trading LLC can be contacted through its FYIND supplier profile to enquire about the required nail specification.
Contact: +971 4 340 3911 | Supplier Enquiry: View New Qamar Al Huda Trading LLC Profile
Mufaddal Raj Building Material Trading lists nail products under the Masonry Nail category on FYIND, including a Taparia-branded Nail and a Brass Nail. Buyers sourcing nails for joinery, decorative work or other suitable fixing applications can contact the supplier to confirm the available specifications. Since the listings do not specify dimensions or pack quantities, verify these details before placing an order.
| Product | Brand | Available Details |
|---|---|---|
| Nail | TAPARIA | Size, material, finish and pack quantity to be confirmed |
| Brass Nail | TAPARIA | Dimensions, head type and pack quantity to be confirmed |
Contact Mufaddal Raj Building Material Trading to confirm stock availability, product specifications and delivery arrangements for Ajman and other UAE locations. Providing the required nail material, dimensions and order quantity can help the supplier recommend a suitable option.
Supplier Contact: +971 52 653 3053 | FYIND Profile: View Supplier Profile
The wall is harder than the nail. A wire nail or a soft nail will bend in concrete. Fix: switch to a hardened steel nail, start the nail with light taps, or use a powder-actuated nail or a drilled anchor for dense concrete.
Hardened nails are brittle and can shatter if struck off-centre or reused after bending. Fix: hit squarely, never re-hammer a bent nail, and always wear safety glasses such as the Vaultex spectacles listed by Mufaddal Raj.
A nail too close to an edge or in hollow block pushes the face out. Fix: stay well back from corners and edges, nail into solid sections, use shorter nails, and switch to a plug and screw for hollow block.
AAC and hollow block hold nails weakly, and vibration loosens them. Fix: use fixings made for the material, or a shield anchor such as the one listed by Mufaddal Raj for heavier loads.
Plain steel nails rust in humid air. Fix: choose galvanised nails for damp areas and coastal sites in Dubai, Sharjah and Ajman, and brass or stainless for visible or wet areas.
Some listings group wire nails with masonry nails. Fix: ask whether the nail is hardened, ask for the hardness figure, and test one on site. Al Jenaidi, Canvas and New Qamar Al Huda list common wire nails, so confirm before ordering for concrete.
Wrong cartridge, wrong nail length or too thin a base can cause failures. Fix: follow the Hilti tool and nail selection guide, check base thickness and use trained operators.
Hammering blindly can hit steel or services. Fix: scan the wall first, keep away from known conduit routes and never nail into post-tensioned slabs.
Loose bulk cartons can contain mixed sizes or less than the stated weight. Fix: ask for sealed, labelled cartons and check the weight on delivery.
| Fixing | Installation | Holding Power | Cost | Best For | Not For |
|---|---|---|---|---|---|
| Masonry nail | Hammer only, no drilling | Light to medium | Lowest | Battens, clips, conduit on block | Heavy or overhead loads |
| Concrete screw | Drill and drive | Medium to high | Medium | Removable fixings in concrete | Very soft or hollow block |
| Wedge or shield anchor | Drill and tighten | High | Medium to high | Brackets and heavier loads | Weak or hollow material |
| Chemical anchor | Drill, clean, inject resin | Highest | High | Heavy, critical loads | Quick light fixings |
| Powder-actuated nail | Tool and cartridge, no drilling | Medium to high | Medium per fixing, tool extra | Fast repeat fixings into concrete or steel | Untrained users, brittle or thin bases |
Brands you will see on fyind.com include Hilti (X-P P8), SUPREME (common nails listed by New Qamar Al Huda), and others such as Milano, Mega and Beto on other listings. Confirm the model and origin with your supplier.
| Brand / Maker | Nail Focus | Listed By | What Buyers Should Check |
|---|---|---|---|
| Hilti | X-P P8 universal powder-actuated nails (carbon steel) | Hilti Emirates (Dubai) | Tool, cartridge, base thickness and approvals |
| Classic Metallic (manufacturer) | Hardened steel nails 2.5-4.2 mm | Classic Metallic Sheet Factory LLC (Sharjah) | Hardness, coating and carton weight |
| SUPREME | Common nails (1 in, 4 kg) | New Qamar Al Huda (Dubai) | Wire nail only, not for concrete |
| Unbranded wire nails | Galvanised and plain wire nails | Al Jenaidi; Canvas (Dubai) | Gauge, length and coating |
| Standard / Document | What It Covers |
|---|---|
| ASTM F1667 | Driven fasteners: nails, spikes and staples |
| EN 10230-1 | Steel wire nails, dimensions and general requirements |
| ISO 1461 / ASTM A153 | Hot-dip galvanised coatings on fasteners |
| ISO 6508 | Rockwell hardness testing of steel |
| Manufacturer data sheet and approvals | Powder-actuated nail and tool ratings from Hilti |
| Buyer / Project | Best Nail | Typical Spec | Suppliers to Start With |
|---|---|---|---|
| MEP crews fixing conduit and cable clips (Dubai, Sharjah, Ajman) | Hardened steel grooved nail | 2.5-3.0 mm x 25-50 mm | Classic Metallic (Sharjah); Hilti Emirates (Dubai) |
| Partition and blockwork contractors | Hardened steel nail, 40-70 mm | 3.0-4.2 mm | Classic Metallic (Sharjah) |
| Concrete and steel fixing on towers and warehouses (Dubai, Abu Dhabi) | Powder-actuated nails | Hilti X-P P8 class | Hilti Emirates (Dubai Investment Park) |
| Joinery and interior fit-out | Steel or brass nails | 2.25 x 25 mm; brass | SM & Rahmani (Dubai); Mufaddal Raj (Ajman) |
| Carpenters and shuttering crews | Galvanised wire nails | 1-4 in, 4-20 kg cartons | Al Jenaidi (Deira); Canvas and New Qamar Al Huda (Al Quoz) |
Mark the spot and hold the fixture steady. Use a club hammer and hold the nail with pliers or a nail holder so your fingers stay clear. Start with light taps, then drive squarely at 90 degrees to the wall. Stay away from edges and joints, and stop if the nail bends. Do not reuse a bent nail.
Use the tool, nail and cartridge combination recommended by the manufacturer, check the base material and its thickness, scan for rebar and services, and use only trained operators with eye and ear protection.
| Check | When | What to Verify | Record Kept |
|---|---|---|---|
| Product check | On delivery | Size, type, coating and carton weight match the order | Delivery note |
| Test fixing | Before the main run | One nail goes in squarely without bending or cracking | Site note |
| Position check | During work | Away from edges, joints and services | Supervisor check |
| Pull test | If specified | Fixing holds the design load | Test sheet |
| PPE check | Every shift | Safety glasses, gloves and shoes worn | Toolbox talk |
The table gives indicative UAE market prices by nail type. Stock-item prices tend to be similar across Dubai, Sharjah and Ajman; large cartons, special coatings and delivery to Abu Dhabi, Al Ain or Ras Al Khaimah change the total.
| Product Format | Typical UAE Price (AED) | Factors Affecting Price |
|---|---|---|
| Common galvanised wire nails (carton) | AED 2 - 6 per kg | Length, gauge, coating, carton size. |
| Hardened steel concrete nails | AED 6 - 14 per kg | Hardness, coating, shank type, length. |
| Steel nails, small packs (for example 2.25 x 25 mm) | AED 4 - 15 per pack | Pack size, coating. |
| Brass nails | AED 12 - 25 per pack | Size, pack size. |
| Hilti-type powder-actuated nails | AED 100 - 400 per box | Nail length, box size; tool and cartridges extra. |
| Shield anchor (3 pcs, concrete) | AED 8 - 25 per pack | Size and brand. |
Disclaimer: Prices shown are indicative UAE market estimates for buyer guidance only. Actual quotations vary based on size, coating, quantity and supplier pricing. Tip: order a few spare cartons for waste, and keep nail sizes separate on site.
| Cost Component | What Drives It | What to Ask |
|---|---|---|
| Nail type and hardness | Hardened or powder-actuated costs more than wire nails | Is it hardened, and what is the hardness? |
| Coating | Plain, electro-galvanised or hot-dip galvanised | What coating and thickness? |
| Size and weight | Length, diameter and kilograms per carton | How many pieces per kg and per carton? |
| Order quantity | Price breaks at carton and pallet quantities | What is the price at 10, 25 and 50 cartons? |
| Branding and documents | Branded nails and papers cost more | Is origin and a data sheet included? |
| Delivery | Dubai, Sharjah and Ajman are short runs; Abu Dhabi, Al Ain and RAK cost more | What is delivery cost and lead time to my site? |
| VAT | UAE VAT of 5% | Is VAT shown separately? |
Masonry nails work with safety gear, anchors and tools on UAE sites.
Who supplies masonry nails in UAE?
Classic Metallic Sheet Factory LLC (Sharjah) lists a hardened steel nail, Hilti Emirates (Dubai) lists the X-P P8 universal nail, SM & Rahmani (Dubai) lists a 2.25 x 25 mm steel nail, Mufaddal Raj (Ajman) lists a brass nail, and Al Jenaidi, Canvas and New Qamar Al Huda (Dubai) list wire and common nails.
What is a masonry nail?
A masonry nail is a hard, heat-treated steel nail that can be hammered into brick, blockwork, mortar and some concrete without drilling. It suits light fixings such as battens and conduit clips.
Can a normal wire nail go into concrete?
Usually no. Common wire nails are soft and bend in concrete and hard block. Use a hardened steel masonry nail or a powder-actuated nail instead.
What size masonry nail should I use?
Choose a length equal to the fixture thickness plus about 25 mm of penetration. For example, an 18 mm batten needs about a 50 mm nail. Common shank sizes are 2.5, 3.0 and 4.2 mm.
How deep should a masonry nail go?
About 25 mm (1 in) into blockwork or brick. In very hard concrete it may go only 20-25 mm, and if it will not go in, switch to an anchor or concrete screw.
What is the difference between a masonry nail and a concrete nail?
The terms are often used interchangeably for hardened steel nails made for masonry and concrete. Check the hardness and shank type rather than the name.
What are Hilti X-P nails?
Hilti X-P P8 is a universal powder-actuated nail listed by Hilti Emirates, in carbon steel for soft and tough concrete, steel and solid limestone brick. It needs the Hilti tool, cartridges and trained operators.
Are galvanised masonry nails better in Dubai?
Yes for damp, outdoor or coastal locations because the zinc coating resists rust. Plain nails are fine for dry interior fixings.
Can I use masonry nails in hollow blocks or AAC?
Hollow blocks hold nails weakly and can crack, and AAC holds them poorly. Use a short grooved nail in a solid section or a plug and screw instead.
Why does my masonry nail bend?
The wall is harder than the nail. Use a harder nail, start with light taps, or move to a powder-actuated nail or drilled anchor.
Is it safe to hammer masonry nails?
Wear safety glasses, gloves and shoes, hold the nail with pliers, strike squarely and never reuse a bent nail. Hardened nails are brittle and can chip.
Can masonry nails hold heavy loads?
No. They suit light to medium fixings. For heavy, overhead or safety-critical loads, use approved anchors.
How much do masonry nails cost in UAE?
Indicatively, wire nails cost about AED 2-6 per kg, hardened steel nails about AED 6-14 per kg and Hilti-type powder-actuated nails about AED 100-400 per box, plus the tool and cartridges.
Where can I buy masonry nails in Dubai, Sharjah and Ajman?
In Dubai, Al Jenaidi is in Deira, Canvas and New Qamar Al Huda are in Al Quoz Industrial Area 3 and Hilti Emirates is at Dubai Investment Park 1. In Sharjah, Classic Metallic Sheet Factory lists a hardened steel nail, and in Ajman Mufaddal Raj is at Al Jurf Industrial Area 1.
What documents should come with masonry nails?
Ask for the data sheet or material details, hardness and coating information, origin and any conformity papers. For Hilti nails, ask for the tool and nail selection guide.
How many masonry nails are in a kilogram?
It depends on size. As a guide, 2.5 x 25 mm nails run about 800-900 per kg, 3.0 x 50 mm about 320 per kg and 4.2 x 100 mm about 85 per kg.
What information should I provide when requesting a masonry nail quotation?
Send the wall type, what you are fixing and its thickness, nail type, length and diameter, coating, quantity, brand or document needs, and the delivery location and date.
Do UAE suppliers deliver masonry nails across the emirates?
Many deliver across Dubai, Sharjah and Ajman and can arrange Abu Dhabi and the northern emirates. Al Jenaidi states it delivers to companies, warehouses and project sites. Ask each supplier for delivery cost and time.
0 
.webp)
