.webp)
If a safety glove "failed" on site - cut through, burnt through or soaked through - the first question is rarely about the brand. It is whether the glove was rated for that hazard. A nitrile-coated knit glove, a cut-resistant HPPE glove, a chemical-resistant gauntlet, a welding glove and a rubber insulating glove can all be called "work gloves", but each is tested to a different standard and protects against a different risk. Below is how to read the markings, the specifications that decide whether a glove protects or only feels safe, UAE price benchmarks, and seven suppliers across Dubai, Sharjah, Ajman and Abu Dhabi you can contact before you order.
Safety glove buying mistakes are almost always rating and sizing mistakes, not brand mistakes - the wrong hazard class, a cut letter misread as a cut level, a gauge too thin for the job, or a size a fraction too tight in UAE heat. Handling steel sheet and sharp edges? You want a glove with an EN 388 cut letter or ANSI cut level printed on it. Handling solvents? You need an EN ISO 374-1 chemical glove, not a general nitrile-coated one. Welding? Look for EN 12477 and EN 407. Each answer below points to the exact spec you should be asking your supplier for.
These gloves share a shelf and a name in many UAE shops, but each is a different protective product. Buying the wrong one either wastes money or leaves a hand unprotected against the hazard that matters.
| Feature | Mechanical / Cut-Resistant Gloves | Chemical-Resistant Gloves | Welding & Heat-Resistant Gloves | Electrical Insulating Gloves |
|---|---|---|---|---|
| Main Standard | EN 388 (and ANSI/ISEA 105 cut levels A1-A9) | EN ISO 374-1 (Types A, B and C) | EN 12477 (welders) and EN 407 (heat) | EN 60903 / ASTM D120 (Class 00 to 4) |
| Typical Material | Knit liner (HPPE, aramid, nylon, polyester) with PU, nitrile or latex coating; or leather | Nitrile, neoprene, PVC, latex or butyl, often with a longer cuff | Split leather with aramid stitching and heat-resistant lining | Rubber, usually worn under leather protector gloves |
| Main Job | Protect against cuts, abrasion, tears and punctures | Resist chemicals penetrating or permeating the glove | Resist contact heat, sparks and spatter | Protect against electric shock on live work |
| Best For | Fabrication, sheet metal, glazing, warehouses, construction | Oil & gas, chemical handling, cleaning, maintenance | Welding, foundries, hot-metal handling | Switchgear, panels, utilities, EPC contractors |
So which one do you actually need? Handling sharp edges? That's a cut-rated mechanical glove. Handling solvents, acids or oils? That's a chemical glove with an EN ISO 374-1 mark. Welding or hot metal? That's an EN 12477 / EN 407 glove. Working on live electrical equipment? That's a voltage-class rubber glove. Several UAE suppliers list more than one of these, so always confirm the rating, not just the word "safety glove".
The everyday glove: a knitted nylon, polyester or cotton liner with a PU, nitrile or latex palm coating. FYIND's UAE guide puts general-use PU or nitrile gloves at roughly AED 1.30-4.80 per pair. PU suits dry, precise handling; nitrile (smooth, foam or sandy) resists oils and grips in oily conditions; latex gives strong wet grip but can trigger allergic reactions. UAE listings include a latex-coated glove in size 10 sold with 12 in the inner pack and 600 in the outer carton (Al Badr Al Tamam Hardware Trading), a polycotton latex-coated glove, a natural-white cotton knitted glove sold in a 25-dozen pack and a grey-grip nitrile glove. Check the EN 388 digits - a coated glove with no cut letter is not a cut-resistant glove.
For sheet metal, glass, blades and sharp edges. Cut protection comes from the liner yarn - HPPE, Dyneema, aramid or steel and glass-fibre blends - while the coating adds grip. Cut level is read from the fifth EN 388 character (letters A-F, ISO 13997 TDM test) or the ANSI/ISEA 105 level (A1-A9). FYIND benchmarks EN 388 cut-resistant gloves at about AED 8.50-28 per pair and notes local suppliers stock ANSI cut grades A3-A8. As a rule of thumb, A1-A3 suits light edges and A7-A9 is the heavy-cut group; match the level to the real job rather than buying the highest grade by default.
Leather palm, rigger and driver gloves handle abrasion, rough surfaces and light heat. FYIND listings include a rigger leather glove (5.5 x 10.5 in) marked CE Cat II, EN 420 and EN 388 (4244), a premium goatskin driver's glove in sizes 2XS-2XL, a double-palm leather glove sold in 12-piece packs and a suede leather canvas glove sold in 10-piece packs. (EN 420 has since been replaced by EN ISO 21420.) Leather stiffens when it dries after soaking and offers little chemical resistance, so confirm the leather type - goatskin for dexterity, split cowhide for durability - and the EN 388 marking.
For solvents, acids, caustics, oils and cleaning chemicals. Resistance depends on the glove polymer and on the specific chemical, so look for the EN ISO 374-1 pictogram: Type A indicates at least 30 minutes' breakthrough time against at least six listed test chemicals, Type B against at least three, and Type C against at least one. FYIND-listed examples include an Ansell AlphaTec 58-535B textured grey nitrile glove (13.38-13.7 in long), double-dipped chemical gloves and heavy-duty re-usable rubber gloves in black. Always match the glove to the manufacturer's permeation data for your chemical, not just the word "chemical".
Welding gloves are tested to EN 12477 - Type A for heavier-duty welding processes and Type B where more dexterity is needed, such as TIG - and heat performance is rated under EN 407, where contact-heat levels 1 to 4 correspond to threshold temperatures of 100, 250, 350 and 500 °C. FYIND listings include red leather welding gloves with piping from Safex Safety and 16-inch welding gloves; cuff length matters for spatter. Verify the EN 407 digits and lining, because a leather glove with no heat rating is not a welding glove.
For live electrical work, rubber insulating gloves are classed by maximum use voltage under EN 60903 / ASTM D120: Class 00 up to 500 V AC, Class 0 up to 1,000 V, Class 1 up to 7,500 V, Class 2 up to 17,000 V, Class 3 up to 26,500 V and Class 4 up to 36,000 V AC. They are normally worn under leather protector gloves and need periodic electrical testing. FYIND lists electricians' gloves (size 10 in, 290 g) from Abu Dhabi Hardware Company WLL; the listing does not state a voltage class, so confirm whether it is a rated insulating glove or a general electrician's work glove.
Disposable nitrile gloves (listed in blue, 1,000-piece boxes) protect against light contamination, not against sharp tools or strong chemicals. Specialty options include anti-cut and anti-vibration gloves such as the Eyevex SAVG 9000 (7 gauge; cotton, nylon and chloroprene rubber) and freezer gloves. Match the specialty glove to the hazard and ask for the relevant standard, for example EN 511 for cold and EN ISO 10819 for vibration.
Handling sheet metal, glass or blades? Choose a cut-rated glove and read the EN 388 letter or ANSI level. Handling oils, solvents or acids? Choose an EN ISO 374-1 chemical glove and check the permeation data for your chemical. Welding or hot metal? Choose EN 12477 and EN 407. Live electrical work? Choose a voltage-class rubber glove with a current test certificate. General packing, assembly or light site work? A PU or nitrile-coated knit glove is usually enough. Whichever you choose, give the supplier the hazard, material being handled, size range, quantity and the standard your site audit expects.
The marking printed on a glove tells you what it was actually tested for. A typical current mechanical marking reads like 4X43CP: abrasion 4, coup cut X (not applicable), tear 4, puncture 3, ISO 13997 cut level C, impact protection P. The rating grid and CE mark should be physically printed on the glove, and FYIND's guide advises requesting a technical data sheet and CE document with every quotation.
| EN 388:2016+A1:2018 Position | What It Tests | Scale |
|---|---|---|
| 1 | Abrasion resistance | Levels 1-4 (100, 500, 2,000 and 8,000 cycles) |
| 2 | Blade cut (coup test) | Levels 1-5, or X where the coup test is not applicable |
| 3 | Tear resistance | Levels 1-4 (10, 25, 50 and 75 N) |
| 4 | Puncture resistance | Levels 1-4 (20, 60, 100 and 150 N) |
| 5 | ISO 13997 (TDM) cut resistance | Letters A-F (A about 2 N up to F about 30 N) |
| 6 | Impact protection (optional) | P if passed; absent means no impact claim |
| EN 388 Cut Letter | Cutting Force (ISO 13997) | Approx. ANSI/ISEA 105 Level | Approx. Grams |
|---|---|---|---|
| A | about 2 N and above | A1 | 200-499 g |
| B | about 5 N and above | A2 | 500-999 g |
| C | about 10 N and above | A3 | 1,000-1,499 g |
| D | about 15 N and above | A4 | 1,500-2,199 g |
| E | about 22 N and above | A5 | 2,200-2,999 g |
| F | about 30 N and above | A6-A9 | 3,000 g and above (A9 is 6,000 g+) |
Buyer tip: EN 388 stops at F, so ANSI levels A6 to A9 all read as F on an EN glove - the ANSI scale runs higher. Gloves marked only to the older EN 388:2003 (no cut letter) are out of date; the 2016 version has been required for products sold in Europe since April 2019.
| Standard | What It Covers | What to Check |
|---|---|---|
| EN ISO 21420 | General requirements: sizing, labelling, instructions | Size marking, pictograms and instructions for use |
| EN ISO 374-1 | Chemical protection (Types A, B, C) | Type, listed test-chemical letters and breakthrough data |
| EN 407 | Thermal risks: contact heat, flammability, convective and radiant heat, molten-metal splash | Six-digit rating and the levels that matter for your task |
| EN 12477 | Welders' gloves, Types A and B | Type, plus EN 388 and EN 407 minimum levels |
| EN 511 | Protection against cold | Cold-resistance levels for freezer or outdoor use |
| EN 60903 / ASTM D120 | Live-working rubber insulating gloves, Class 00-4 | Class, size, test date and certificate |
Sources: PIP and Westchester EN 388:2016 conversion tables; WC Safety and BAC Tactical EN 388 vs ANSI/ISEA 105 guides; Uvex safety glove standards guide; SBE Direct EN 388 guide; FYIND safety glove directory. Figures are typical standard values - always confirm against the certificate for the specific glove.
Understanding what a glove is made of helps you read a quote and see why two gloves at different prices are not equivalent.
Size, gauge and pack size are where quotes most often drift apart. Use these guides to compare like with like.
| Gauge | Liner | Typical Use |
|---|---|---|
| 7 gauge | Thick, heavy knit | Cold work, anti-vibration, heavy handling (for example the Eyevex SAVG 9000 listing) |
| 10 gauge | Medium-heavy knit | General handling and construction work |
| 13 gauge | Fine knit | Precision assembly and cut-resistant liners (13-gauge HPPE liners are commonly listed) |
| 15-18 gauge | Very fine knit | High-dexterity light assembly |
| Glove Size (EN ISO 21420) | Typical Letter Size | Notes |
|---|---|---|
| 6-7 | XS-S | Smaller hands |
| 8 | M | Common medium |
| 9 | L | Common large |
| 10-11 | XL-XXL | Listings quoting "size 10" usually mean XL |
Pack-size tip: compare price per pair, not per pack. Listings show 12 pairs to a dozen, an inner pack of 12 with an outer carton of 600 (unit not stated on the listing - confirm pairs or pieces), a 25-dozen pack (300 pairs) of cotton gloves, 12-piece and 10-piece packs of leather gloves, and 1,000-piece boxes of disposables. A pack that looks cheaper may simply hold fewer gloves.
Al Badr Al Tamam Hardware Trading lists WFENG latex-coated safety gloves through its FYIND digital store. The available product listings include five model references: WF13065, WF13066, WF13067, WF13068 and WF13069. All five listings show size 10, with inner quantities of 12 pairs or units as listed and outer carton quantities of either 480 or 600. Buyers sourcing hand protection for construction, maintenance, workshops and general material handling can enquire about the individual models, coating details, packaging and bulk pricing.
| Product Model | Listed Size | Inner Quantity | Outer Quantity |
|---|---|---|---|
| WF13065 | 10 | 12 | 480 |
| WF13066 | 10 | 12 | 480 |
| WF13067 | 10 | 12 | 600 |
| WF13068 | 10 | 12 | 600 |
| WF13069 | 10 | 12 | 600 |
Note: The quantities above reproduce the supplier listing fields. Confirm whether they refer to pairs, individual gloves, inner packs or outer cartons before placing a bulk order.
Supplier: Al Badr Al Tamam Hardware Trading
Location: Sharjah, UAE
Brand: WFENG
Product Category: Latex-Coated Safety Gloves
Phone: +971 58 910 9077
Mobile: +971 50 763 1225
Looking for latex-coated safety gloves in Sharjah or elsewhere in the UAE? Contact Al Badr Al Tamam Hardware Trading to enquire about WFENG WF13065, WF13066, WF13067, WF13068 and WF13069. Include your required model, size, quantity and delivery location to help the supplier respond with relevant availability and pricing.
Product listing: WF13065 |
WF13066 |
WF13067 |
WF13068 |
WF13069
Supplier profile: Al Badr Al Tamam Hardware Trading – FYIND
Safatco Trading LLC lists Vaultex and Honeywell safety gloves on its FYIND storefront for buyers sourcing hand protection for construction, maintenance, workshops and general material handling. The visible range includes half latex-coated crinkle-finish gloves and black knitted gloves. Buyers can enquire about the exact model, fit, coating, packaging and protection specifications before selecting gloves for their workplace.
| Product / Model | Listed Specifications | Buyer Considerations |
|---|---|---|
| Vaultex Half Latex Coated Crinkle Finish Gloves | 10 inch; blue and yellow; Vaultex brand | Confirm coating coverage, liner material, size suitability and grip performance for the intended task. |
| Honeywell TNA2232272 Black Polyamide Knitted Gloves | Black; 13 gauge; 24.5 cm length; model TNA2232272; origin listed as UAE | Verify the coating, available sizes, mechanical protection rating and intended applications. |
| Honeywell Polytril Air Gloves, Black | Black; 24.5 cm length; packaging listed as 10 pcs/packet | Confirm the exact model, size range, coating details and whether the listed quantity refers to individual gloves or pairs. |
Supplier: Safatco Trading LLC
Location: Dubai, UAE
Brands listed: Vaultex and Honeywell
Telephone: +971 4 227 1749
Looking for industrial safety gloves in Dubai? Contact Safatco Trading LLC to enquire about Vaultex half latex-coated crinkle-finish gloves and Honeywell knitted gloves. Share your required model, size, quantity and application to help confirm suitability, availability and pricing.
Supplier Profile: View Safatco Trading LLC on FYIND
Safe Tag Fire Fighting and Safety Equipment Trading LLC supplies a range of personal protective equipment through its online catalogue. Its hand protection range includes cut-resistant gloves, latex-coated work gloves, nitrile and chemical-resistant gloves, leather welding gloves, rigger gloves and knitted grip gloves. Buyers can explore products from brands such as Ansell, Ameriza, American Safety, DPL, Vaultex, Honeywell, SHOWA, Uken, Workland and Eyevex, subject to individual product availability. The range supports procurement for construction, fabrication, industrial maintenance, warehousing and other workplaces that require task-specific hand protection.
| Brand | Listed Product Examples | Features and Specifications |
|---|---|---|
| DPL | Viking Thermo A6 Coated Gloves | Listed cut resistance level A6/F; Kevlar and aramid-steel liner construction; sizes 8, 9, 10, 11 and 12. |
| Vaultex | ENH Latex Coated Gloves | Grey knitted shell with blue half-latex coating and crinkle finish; flexible construction, breathable elastic wristband and anti-slip grip. |
| Uken | U5003 Black Grip Gloves | 13-gauge polyester shell, PVC coating, flexible construction and antistatic properties as listed by the supplier; intended for electronic and precision-instrument assembly. |
| Ansell | AlphaTec and TouchNTuff gloves | Selected models include nitrile chemical-splash protection, chemical-resistant gloves and flock-lined latex gloves. Protection and compatibility vary by model. |
| Ameriza | Leather welding gloves and rigger gloves | The listed range includes welted seams, Kevlar-stitched welding gloves, leather rigger gloves and driver gloves. |
| American Safety | TIG welding gloves and split-leather welding gloves | Options for welding-related hand protection; confirm the applicable heat, abrasion and mechanical protection ratings for each model. |
Product specifications above refer to selected models in Safe Tag's catalogue and are not applicable to every glove sold under the same brand. Confirm current stock, model numbers and manufacturer documentation before ordering.
Selecting industrial safety gloves requires more than checking the brand or material. Buyers should confirm the product's technical specifications and ensure they match the workplace risk assessment.
Businesses purchasing safety gloves in bulk can enquire about available brands, model references, size ranges, pack quantities and volume pricing. For a more accurate quotation, specify the glove type, required protection level, quantity, delivery location and intended application. Confirm availability, lead time and applicable documentation with Safe Tag before placing an order.
Supplier: Safe Tag Fire Fighting and Safety Equipment Trading LLC
Location: Al Karama, Dubai, UAE
Brands: Ansell, Ameriza, American Safety, DPL, Vaultex, Honeywell, SHOWA, Uken, Workland and Eyevex, among others
Telephone: +971 4 323 5419
WhatsApp: +971 54 449 5239
Looking for safety gloves in Dubai or elsewhere in the UAE? Contact Safe Tag to enquire about cut-resistant gloves, latex-coated grip gloves, chemical-resistant gloves, welding gloves and other industrial hand protection. Share your required brand, model, size, quantity and workplace application to obtain a relevant quotation.
FYIND Supplier Profile: View Profile
Maintive offers a broad selection of safety and jobsite gloves through its online store, including DEWALT, IRWIN and ANSELL models. Its range covers general-purpose work gloves, cut-resistant and impact-protection gloves, nitrile-coated handling gloves and chemical-resistant hand protection. Product specifications vary by model, so buyers should confirm the required protection level and suitability for their application before ordering.
| Brand & Product | Listed Features & Specifications | Potential Applications |
|---|---|---|
| DEWALT DPG250L Vibration Absorption Leather Gloves | Leather construction; model DPG250L; six-month warranty | Suitable applications should be confirmed against the manufacturer's product information. |
| DEWALT DPG31L Premium Driver Elastic Gloves | Elastic material; sizes M, L and XL; model DPG31L; six-month warranty | Driver and general handling tasks, subject to product suitability. |
| IRWIN Heavy Duty Jobsite Gloves | Model 10503827; X-Large | Jobsite work and material handling, subject to the product's protection specifications. |
| ANSELL EDGE 48-126 Industrial Gloves | Knitted polyester liner; black polyurethane coating; 15-gauge construction; size 9 and length of 215–270 mm listed on the product page. | Light-duty handling, small-part handling and assembly tasks. |
| ANSELL EDGE 48-128 Nitrile-Coated Gloves | Knitted polyester liner; black nitrile coating; 13-gauge construction; abrasion and oil resistance. | General handling, packaging, inspection and applications involving light oil exposure. |
| ANSELL RINGERS R065 Cut-Resistant Gloves | HPPE liner; knitted construction; sandy nitrile palm; TPR impact-protection features; touchscreen-compatible fingertips. | Selected tasks involving sharp or rough components, tool handling and impact hazards, subject to the specified rating. |
| ANSELL HyFlex 11-840 Nitrile Foam-Coated Gloves | Nitrile foam coating; knitted nylon/spandex liner; 15-gauge construction; latex-free listing. | Small-part handling, assembly, logistics and other tasks requiring dexterity. |
| ANSELL AlphaTec Solvex 37-676 Chemical-Resistant Gloves | Nitrile compound; cotton-flocked lining; textured finish for grip; size 9 shown on the product page. | Chemical-handling applications after checking chemical compatibility and the applicable protection rating. |
Product details above are based on Maintive's published listings. Check current stock, model variants, sizes, warranty terms and applicable certification with the supplier before purchase.
Supplier: Maintive
Location: Dubai, UAE
Telephone: +971 4 802 9010
FYIND Supplier Profile: View Maintive on FYIND
Official Website: maintive.com
Mufaddal Raj Building Material Trading lists 36 safety-glove products on its FYIND storefront. The range includes Vaultex latex-coated, PU-coated, dotted and freezer gloves, Workland coated and cut-resistant gloves, Linepro electrical gloves, Armstrong latex-coated gloves and Miller latex-coated gloves. Buyers can enquire about suitable glove types, available sizes, stock and technical documentation for construction, industrial handling and maintenance requirements.
| Brand & Product | Listed Model / Specifications | Buyer Considerations |
|---|---|---|
| Vaultex Latex-Coated Gloves ENH | Sizes L and XL shown. | Confirm coating coverage, liner material, grip requirements and applicable protection ratings. |
| Vaultex PU-Coated Gloves NJD | Sizes M to XL shown. | Consider for handling tasks where dexterity and a suitable grip are important; verify the product datasheet. |
| Vaultex Dotted Gloves VDA / VDB / VDC / VDD | Multiple dotted-glove variants are listed. | Confirm the exact variant, material, dotted surface, available sizes and pack quantity. |
| Vaultex Double-Sided Dotted Gloves | Models include VS91 (L and XL), PKI (L and XL), CRD (L and XL) and UBY (XL). | Check both-side grip requirements, fit and intended handling application. |
| Vaultex Latex-Coated Freezer Gloves ENO | Sizes S to 2XL shown. | Ask for the specified temperature range and thermal-protection details before selecting gloves for cold environments. |
| Workland Cut D Nitrile Latex-Coated Gloves SAO | Sizes S to 2XL shown. | Request the exact EN 388 cut-resistance marking and test documentation for the selected model. |
| Workland Latex-Coated Gloves GIF / ALZ | GIF: XL; ALZ: XL shown. | Verify liner construction, coating coverage, size availability and abrasion resistance. |
| Armstrong KGP Latex-Coated Gloves | Size XL shown. | Confirm the liner, coating finish, fit and applicable mechanical-protection rating. |
| Miller HLL Latex-Coated Gloves | Size XL shown. | Ask about available sizes, pack quantities and the model's intended application. |
| Linepro Electrical Gloves | TUE, MON and FRI variants listed at 36 cm. | Confirm the glove's voltage class, applicable electrical-safety standard, test date and certification before electrical work. |
The supplier's FYIND listings also include Vaultex safety spectacles, safety shoes and other building-material and hardware products, making it worth enquiring about multiple site-supply requirements together.
Supplier: Mufaddal Raj Building Material Trading
Location: Ajman, UAE
Mobile: +971 52 653 3053
FYIND Supplier Profile: View Supplier Profile
Official Website: mrbuildingmaterials.com
Abu Dhabi Hardware Company WLL lists electricians' gloves on FYIND in three size variants: 98 65 40, 98 65 41 and 98 65 42. The listings specify glove size and product weight, making it easier for buyers to identify the required variant. Electrical insulation rating, material composition and certification are not established by the visible listing details, so request the manufacturer's datasheet before selecting gloves for electrical work.
| Product | Listed Specifications | Buyer Verification |
|---|---|---|
| Electricians' Gloves 98 65 40 | Size: 9 in Weight: 281 g |
Confirm material, intended use, electrical rating and available certification. |
| Electricians' Gloves 98 65 41 | Size: 10 in Weight: 290 g |
Verify the voltage class, applicable standard and test documentation before use. |
| Electricians' Gloves 98 65 42 | Size: 11 in Weight: 290 g |
Check fit, stock availability, electrical protection rating and inspection requirements. |
For electrical work, do not assume that a glove is electrically insulating based on its product name or appearance. Confirm its rating and suitability for the actual electrical hazard before use.
Supplier: Abu Dhabi Hardware Company WLL
Location: Abu Dhabi, UAE
Telephone: +971 2 554 8890
FYIND Product: Electricians' Gloves
Supplier Profile: View Abu Dhabi Hardware Company WLL on FYIND
Safex Safety supplies personal protective equipment and lists several types of gloves on its FYIND storefront. The visible listings include dotted gloves, cut-resistant gloves, vinyl-coated gloves and Olympia double-palm working gloves. Its wider PPE range includes safety shoes, helmets, vests, disposable coveralls, respiratory protection and fall-protection equipment. Buyers can enquire about glove availability, sizes, materials and technical documentation for their workplace requirements.
| Product | Visible Listing Details | Buyer Considerations |
|---|---|---|
| Dotted Gloves Pakistan | Dotted palm-and-finger design; blue-and-white appearance. | Confirm liner material, dot coating, available sizes and grip performance. |
| Cut Resistant Gloves | Knitted-looking glove with a dark coated palm and grey back. | Request the exact EN 388 cut-resistance marking or applicable ANSI/ISEA rating. |
| Vinyl Coated Gloves | Light-coloured gloves listed under vinyl-coated gloves. | Confirm coating composition, liner, intended use and resistance limitations. |
| Working Gloves Double Palm Olympia (India) | Brand: Olympia; double-palm working glove design. | Ask about palm reinforcement, leather type, sizes and abrasion-resistance documentation. |
| Welding Gloves Red With Piping | Listed product; red glove with piping. | Confirm leather type, cuff length, lining and EN 12477 and EN 407 ratings, where applicable. |
Safex Safety's listed product range also includes safety shoes, safety helmets, safety vests, 40 GSM non-woven disposable coveralls, a 3M 6800 full-face mask, fire extinguishers and fall-arrester wire-rope lifelines listed in lengths of 10–30 m. Buyers should verify the specifications and availability of each item before ordering.
Supplier: Safex Safety
Location: Abu Dhabi, UAE
Telephone: +971 2 583 2284
FYIND Supplier Profile: View Safex Safety on FYIND
FYIND Product: Welding Gloves Red With Piping
A glove is described as cut-resistant but carries no EN 388 cut letter or ANSI level, so the claim cannot be verified and the glove can fail a site audit. Fix: ask for the rating grid and CE mark to be physically printed on the glove, and request a technical data sheet and test certificate with every quotation.
Buyers read the second digit (coup cut, 1-5) as the cut level, or assume EN 'F' equals ANSI 'A9'. A glove marked 4X43C has no coup rating (X) and a TDM cut level C, roughly ANSI A3; and because EN stops at F, ANSI A6-A9 all read F. Fix: specify the cut requirement by the fifth-position letter or ANSI level, and use the conversion table above.
A general PU or nitrile-coated knit glove, or a thin disposable nitrile glove, is used with solvents or acids. Without an EN ISO 374-1 mark and permeation data for the specific chemical, breakthrough can happen quickly and unnoticed. Fix: choose a Type A, B or C chemical glove matched to the chemical, and check the manufacturer's breakthrough times.
Some employers expect workers to buy their own gloves or deduct the cost. UAE rules state that employees are entitled to complimentary PPE appropriate to the task, and employers must provide a safe working environment under Federal Decree-Law No. 33 of 2021. Fix: budget PPE as an employer cost, set up supply agreements for ongoing replenishment and keep issue records.
One supplier quotes per dozen, another per pack of 10 or 12, another per carton of 600, and disposables per 1,000 pieces; listings do not always say whether quantities are pairs or pieces. Fix: convert every quote to price per pair, and confirm in writing whether the stated quantity is pairs or pieces.
A glove described as an electrician's glove is used on live equipment without a stated EN 60903 / ASTM D120 class, size marking or test certificate. A glove for general electrical trade work is not necessarily rated for live-line protection. Fix: specify the class for your working voltage, wear leather protector gloves over rubber insulating gloves, and keep test dates and periodic retest records.
Several suppliers list gloves among power tools, hardware or building materials. That can be convenient, but stock depth, certificates and rating information may be thinner than at a specialist PPE dealer. Fix: ask which glove models are held in stock, request datasheets and certificates, and confirm quantities before relying on one supplier for a large or audited project.
UAE suppliers stock a mix of international brands, regional brands and private-label gloves. The brands below are those visible on the FYIND listings and storefronts of the suppliers in this guide: WFENG, Vaultex, Honeywell, DPL, Uken, Ansell, DEWALT, IRWIN, Ameriza, American Safety, Workland, Armstrong, Miller, Linepro, SHOWA, Eyevex and Olympia. Specifications refer to selected models and do not apply to every glove sold under the same brand, so model number, protection rating, size, certificate and current stock should always be confirmed with the supplier before ordering.
| Brand | Listed Models & Product Focus | Listed Specifications | Listed By | What Buyers Should Check |
|---|---|---|---|---|
| WFENG | Latex-coated safety gloves WF13065, WF13066, WF13067, WF13068, WF13069 | Size 10; inner quantity 12; outer quantity 480 (WF13065, WF13066) or 600 (WF13067-WF13069) | Al Badr Al Tamam Hardware Trading (Sharjah) | Coating coverage, liner material, and whether quantities are pairs or pieces |
| Vaultex | Half latex-coated crinkle-finish gloves; ENH latex-coated; NJD PU-coated; dotted VDA / VDB / VDC / VDD; double-sided dotted VS91, PKI, CRD, UBY; ENO latex-coated freezer gloves | 10 in, blue and yellow (half latex-coated); ENH: grey knitted shell, blue half-latex coating, crinkle finish, elastic wristband, anti-slip grip; sizes L-XL (ENH), M-XL (NJD), S-2XL (ENO) | Safatco (Dubai); Safe Tag (Dubai); Mufaddal Raj (Ajman) | Coating coverage, liner and size availability; temperature rating of the ENO freezer glove before cold-room use |
| Honeywell | TNA2232272 black polyamide knitted gloves; Polytril Air gloves, black | TNA2232272: 13 gauge, 24.5 cm, origin listed as UAE; Polytril Air: 24.5 cm, 10 pcs per packet | Safatco (Dubai) | Coating, sizes, mechanical rating, and whether the 10 pcs are pairs or single gloves |
| DPL | Viking Thermo A6 coated gloves | Cut level listed as A6/F; Kevlar and aramid-steel liner; sizes 8, 9, 10, 11 and 12 | Safe Tag (Dubai) | EN 388 certificate for the exact model and the ANSI/ISEA cut level |
| Uken | U5003 black grip gloves | 13-gauge polyester shell; PVC coating; antistatic properties as listed; for electronic and precision-instrument assembly | Safe Tag (Dubai) | Antistatic test standard and performance data before use in ESD-controlled areas |
| Ansell | AlphaTec and TouchNTuff gloves; EDGE 48-126; EDGE 48-128; RINGERS R065; HyFlex 11-840; AlphaTec Solvex 37-676; AlphaTec 58-535B (FYIND listing) | EDGE 48-126: 15-gauge polyester liner, black PU coating, size 9; EDGE 48-128: 13-gauge, black nitrile; RINGERS R065: HPPE liner, sandy nitrile palm, TPR impact protection, touchscreen fingertips; HyFlex 11-840: nitrile foam, nylon/spandex liner, 15-gauge, latex-free listing; Solvex 37-676: nitrile, cotton-flocked, textured, size 9; 58-535B: textured grey nitrile, 13.38-13.7 in | Maintive (Dubai); Safe Tag (Dubai) | Ratings are model-specific: EN 388 digits (including R065 cut and impact) and EN ISO 374-1 type with chemical data for AlphaTec models |
| DEWALT | DPG250L vibration absorption leather gloves; DPG31L premium driver elastic gloves | DPG250L: leather construction; DPG31L: elastic material, sizes M, L, XL; six-month warranty on both | Maintive (Dubai) | Warranty terms; for the vibration claim, ask for the test standard (for example EN ISO 10819) |
| IRWIN | Heavy Duty Jobsite Gloves, model 10503827 | Size X-Large | Maintive (Dubai) | Protection specification and available size range |
| Ameriza | Leather welding gloves, leather rigger gloves and driver gloves | Welted seams; Kevlar-stitched welding gloves | Safe Tag (Dubai) | EN 12477 type, EN 407 levels and EN 388 digits for the exact model |
| American Safety | TIG welding gloves; split-leather welding gloves | Welding-related hand protection | Safe Tag (Dubai) | Applicable heat, abrasion and mechanical protection ratings for each model |
| Workland | Cut D nitrile latex-coated gloves SAO; latex-coated gloves GIF and ALZ | SAO: sizes S to 2XL; GIF and ALZ: XL | Safe Tag (brand listed); Mufaddal Raj (Ajman, models listed) | EN 388 marking and the test documentation behind the cut D claim |
| Armstrong / Miller | Armstrong KGP latex-coated gloves; Miller HLL latex-coated gloves | Size XL listed for both | Mufaddal Raj (Ajman) | Liner, coating finish, mechanical rating and pack quantities |
| Linepro | Electrical gloves TUE, MON and FRI | 36 cm length listed | Mufaddal Raj (Ajman) | Voltage class, applicable standard, test date and certificate before any live work |
| SHOWA | Brand listed in Safe Tag's glove catalogue | Model details not shown on the listing reviewed | Safe Tag (Dubai) | Exact model numbers and ratings |
| Eyevex | SAVG 9000 anti-cut, anti-vibration glove (FYIND listing); brand also listed by Safe Tag | 7 gauge; cotton, nylon and chloroprene rubber | Safe Tag (Dubai) | EN 388 cut level and EN ISO 10819 vibration rating |
| Olympia | Working gloves double palm Olympia (India); Super Olympia KG-101 cotton knitted glove (FYIND listing) | Double-palm design; KG-101: 10 in, natural white, 25-dozen pack | Safex Safety (Abu Dhabi); other FYIND suppliers | Palm reinforcement, leather type, sizes and abrasion documentation |
| Brand not stated | Dotted gloves, cut-resistant gloves, vinyl-coated gloves and red welding gloves with piping; electricians' gloves 98 65 40, 98 65 41 and 98 65 42 | Electricians' gloves: 9 in / 281 g, 10 in / 290 g, 11 in / 290 g; other items as listed | Safex Safety (Abu Dhabi); Abu Dhabi Hardware Company WLL (Abu Dhabi) | Manufacturer, datasheet and ratings; the electricians' glove listing does not establish an electrical insulation rating |
| Other FYIND-listed brands | Skeleton Nit 3; Milano double-palm leather; Rigger HG 1108; Veevex grey-grip nitrile | Nit 3: sizes 7-11, black; Milano: 12 pcs; HG 1108: 5.5 x 10.5 in, CE Cat II, EN 420, EN 388 (4244) | Other suppliers in the FYIND safety glove directory | Current EN ISO 21420 marking (EN 420 has been replaced) and EN 388 digits |
| Buyer Need | Recommended Product | Why |
|---|---|---|
| Packing, assembly and light handling | PU or nitrile-coated knit glove, 13 gauge | Light, dexterous grip at the lowest price per pair |
| Sheet metal, glass or blade handling | Cut-rated glove (EN 388 letter C-F / ANSI A3-A6+) | Liner yarn provides the cut protection |
| Oily or wet handling | Nitrile foam or sandy-coated glove | Grip in oil and wet conditions |
| Solvents, acids and cleaning chemicals | EN ISO 374-1 chemical glove (nitrile, neoprene or PVC) | Tested breakthrough time against listed chemicals |
| Welding, grinding and hot metal | EN 12477 / EN 407 split-leather welding glove | Heat, spark and spatter resistance |
| Live electrical work | Class-rated rubber insulating glove with leather protectors | Voltage-class protection with tested certificate |
| Rigging, construction and general heavy duty | Leather rigger or driver glove with EN 388 marking | Abrasion resistance and durability |
Planning your budget? The table below gives indicative UAE benchmarks. Prices for leather, chemical, welding and insulating gloves vary too widely by length, material, class and brand to quote responsibly - request an itemised quote for those.
| Product Format | Indicative UAE Price | Factors Affecting Price |
|---|---|---|
| General-use PU or nitrile-coated gloves | AED 1.30 - 4.80 per pair (FYIND guide) | Liner, coating, gauge, brand, pack size. |
| EN 388 cut-resistant gloves | AED 8.50 - 28 per pair (FYIND guide) | Cut grade, liner yarn, coating, brand. |
| UAE retailer listing examples (not FYIND) | Cut level 3 about AED 10; cut level 5 about AED 15; nitrile-coated knitted about AED 2.00 | Retail pack size and brand; shown for reference only. |
| Leather, chemical, welding, insulating and disposable gloves | Price on request | Material, length, class or type, certificate, brand and quantity. |
Disclaimer: Prices shown are indicative UAE benchmarks from FYIND's safety glove guide and one retailer's public listings, for buyer guidance only, and are not quotations from the suppliers listed above. Actual quotations vary by supplier, rating, material, size and quantity, and VAT and delivery may apply.
Safety gloves are usually bought alongside other hand-protection and PPE categories for UAE sites.
What is the best safety glove for cut protection in the UAE?
It depends on the job. Choose by the rating printed on the glove: an EN 388 cut letter (A-F) or an ANSI/ISEA 105 level (A1-A9). Light edges suit A1-A3, sheet metal and packaging blades suit mid levels, and heavy blade or glass work needs the higher groups. FYIND notes local suppliers stock ANSI cut grades A3-A8.
What does EN 388 4X43CP mean?
Abrasion level 4, coup cut X (not applicable), tear level 4, puncture level 3, ISO 13997 TDM cut level C (about 10 N, roughly ANSI A3) and P for passed impact protection. Higher digits mean higher protection.
What is the difference between EN 388 cut letters and ANSI cut levels?
Both come from the same type of blade-cut test, reported in newtons (EN 388, letters A-F) or grams (ANSI/ISEA 105, levels A1-A9). EN stops at F, so ANSI levels A6 to A9 all read as F on an EN glove.
Are nitrile-coated gloves chemical resistant?
Not necessarily. A nitrile-coated knit glove improves oil and wet grip but is not automatically tested for chemicals, and thin disposable nitrile gloves give only light splash protection. For chemicals, look for the EN ISO 374-1 mark (Type A, B or C) and check the breakthrough data for your chemical.
What gloves do I need for welding?
Welding gloves tested to EN 12477 (Type A for heavier processes, Type B where more dexterity is needed, such as TIG) with an EN 407 heat rating. Check cuff length and lining, because a leather glove with no heat rating is not a welding glove.
Which gloves are suitable for electrical work?
Live electrical work needs rubber insulating gloves rated by voltage class under EN 60903 or ASTM D120 (Class 00 to 4), normally worn under leather protector gloves and tested periodically. A general electrician's work glove is not necessarily a rated insulating glove, so confirm the class and test certificate.
Does UAE law require employers to provide safety gloves?
Yes. MOHRE's Administrative Decision No. 19 of 2023 states that employees are entitled to complimentary personal protective equipment appropriate to the task, and Federal Decree-Law No. 33 of 2021 requires employers to provide a safe working environment. Abu Dhabi's OSHAD and Dubai Municipality add further requirements for sites in those emirates.
How much do safety gloves cost in the UAE?
FYIND's UAE guide gives indicative benchmarks of about AED 1.30-4.80 per pair for general-use PU or nitrile gloves and AED 8.50-28 per pair for EN 388 cut-resistant gloves. Leather, chemical, welding and insulating gloves vary by type and rating - request an itemised quote.
What glove size do I need?
Gloves are sized under EN ISO 21420 from 6 to 11, typically 7 = S, 8 = M, 9 = L, 10 = XL and 11 = XXL. Listings quoting size 10 usually mean XL. A fit that is slightly snug on a cold day can become tight in UAE heat, so offer sizing sets to crews.
What glove gauge should I choose?
Gauge describes how fine the knit is. Lower gauge (7-10) is thicker and more durable; higher gauge (13-18) is thinner with more dexterity. Many cut-resistant liners are 13 gauge.
Can I get samples and bulk or private-label gloves in the UAE?
FYIND's guide notes most PPE suppliers provide sample packs, offer bulk or contract pricing above a few hundred to a couple of thousand pairs, and that private-label production is typically available only at large minimums (around 10,000 pairs per model). Confirm terms with each supplier.
Where can I buy safety gloves in Dubai, Sharjah, Ajman and Abu Dhabi?
Suppliers listed on FYIND include Safatco Trading LLC, Safe Tag Fire Fighting and Safety Equipment Trading LLC and Maintive in Dubai, Al Badr Al Tamam Hardware Trading in Sharjah, Mufaddal Raj Building Material Trading in Ajman, and Abu Dhabi Hardware Company WLL and Safex Safety in Abu Dhabi. Confirm stock, ratings and certificates directly before ordering.
If a safety glove "failed" on site - cut through, burnt through or soaked through - the first question is rarely about the brand. It is whether the glove was rated for that hazard. A nitrile-coated knit glove, a cut-resistant HPPE glove, a chemical-resistant gauntlet, a welding glove and a rubber insulating glove can all be called "work gloves", but each is tested to a different standard and protects against a different risk. Below is how to read the markings, the specifications that decide whether a glove protects or only feels safe, UAE price benchmarks, and seven suppliers across Dubai, Sharjah, Ajman and Abu Dhabi you can contact before you order.
Safety glove buying mistakes are almost always rating and sizing mistakes, not brand mistakes - the wrong hazard class, a cut letter misread as a cut level, a gauge too thin for the job, or a size a fraction too tight in UAE heat. Handling steel sheet and sharp edges? You want a glove with an EN 388 cut letter or ANSI cut level printed on it. Handling solvents? You need an EN ISO 374-1 chemical glove, not a general nitrile-coated one. Welding? Look for EN 12477 and EN 407. Each answer below points to the exact spec you should be asking your supplier for.
These gloves share a shelf and a name in many UAE shops, but each is a different protective product. Buying the wrong one either wastes money or leaves a hand unprotected against the hazard that matters.
| Feature | Mechanical / Cut-Resistant Gloves | Chemical-Resistant Gloves | Welding & Heat-Resistant Gloves | Electrical Insulating Gloves |
|---|---|---|---|---|
| Main Standard | EN 388 (and ANSI/ISEA 105 cut levels A1-A9) | EN ISO 374-1 (Types A, B and C) | EN 12477 (welders) and EN 407 (heat) | EN 60903 / ASTM D120 (Class 00 to 4) |
| Typical Material | Knit liner (HPPE, aramid, nylon, polyester) with PU, nitrile or latex coating; or leather | Nitrile, neoprene, PVC, latex or butyl, often with a longer cuff | Split leather with aramid stitching and heat-resistant lining | Rubber, usually worn under leather protector gloves |
| Main Job | Protect against cuts, abrasion, tears and punctures | Resist chemicals penetrating or permeating the glove | Resist contact heat, sparks and spatter | Protect against electric shock on live work |
| Best For | Fabrication, sheet metal, glazing, warehouses, construction | Oil & gas, chemical handling, cleaning, maintenance | Welding, foundries, hot-metal handling | Switchgear, panels, utilities, EPC contractors |
So which one do you actually need? Handling sharp edges? That's a cut-rated mechanical glove. Handling solvents, acids or oils? That's a chemical glove with an EN ISO 374-1 mark. Welding or hot metal? That's an EN 12477 / EN 407 glove. Working on live electrical equipment? That's a voltage-class rubber glove. Several UAE suppliers list more than one of these, so always confirm the rating, not just the word "safety glove".
The everyday glove: a knitted nylon, polyester or cotton liner with a PU, nitrile or latex palm coating. FYIND's UAE guide puts general-use PU or nitrile gloves at roughly AED 1.30-4.80 per pair. PU suits dry, precise handling; nitrile (smooth, foam or sandy) resists oils and grips in oily conditions; latex gives strong wet grip but can trigger allergic reactions. UAE listings include a latex-coated glove in size 10 sold with 12 in the inner pack and 600 in the outer carton (Al Badr Al Tamam Hardware Trading), a polycotton latex-coated glove, a natural-white cotton knitted glove sold in a 25-dozen pack and a grey-grip nitrile glove. Check the EN 388 digits - a coated glove with no cut letter is not a cut-resistant glove.
For sheet metal, glass, blades and sharp edges. Cut protection comes from the liner yarn - HPPE, Dyneema, aramid or steel and glass-fibre blends - while the coating adds grip. Cut level is read from the fifth EN 388 character (letters A-F, ISO 13997 TDM test) or the ANSI/ISEA 105 level (A1-A9). FYIND benchmarks EN 388 cut-resistant gloves at about AED 8.50-28 per pair and notes local suppliers stock ANSI cut grades A3-A8. As a rule of thumb, A1-A3 suits light edges and A7-A9 is the heavy-cut group; match the level to the real job rather than buying the highest grade by default.
Leather palm, rigger and driver gloves handle abrasion, rough surfaces and light heat. FYIND listings include a rigger leather glove (5.5 x 10.5 in) marked CE Cat II, EN 420 and EN 388 (4244), a premium goatskin driver's glove in sizes 2XS-2XL, a double-palm leather glove sold in 12-piece packs and a suede leather canvas glove sold in 10-piece packs. (EN 420 has since been replaced by EN ISO 21420.) Leather stiffens when it dries after soaking and offers little chemical resistance, so confirm the leather type - goatskin for dexterity, split cowhide for durability - and the EN 388 marking.
For solvents, acids, caustics, oils and cleaning chemicals. Resistance depends on the glove polymer and on the specific chemical, so look for the EN ISO 374-1 pictogram: Type A indicates at least 30 minutes' breakthrough time against at least six listed test chemicals, Type B against at least three, and Type C against at least one. FYIND-listed examples include an Ansell AlphaTec 58-535B textured grey nitrile glove (13.38-13.7 in long), double-dipped chemical gloves and heavy-duty re-usable rubber gloves in black. Always match the glove to the manufacturer's permeation data for your chemical, not just the word "chemical".
Welding gloves are tested to EN 12477 - Type A for heavier-duty welding processes and Type B where more dexterity is needed, such as TIG - and heat performance is rated under EN 407, where contact-heat levels 1 to 4 correspond to threshold temperatures of 100, 250, 350 and 500 °C. FYIND listings include red leather welding gloves with piping from Safex Safety and 16-inch welding gloves; cuff length matters for spatter. Verify the EN 407 digits and lining, because a leather glove with no heat rating is not a welding glove.
For live electrical work, rubber insulating gloves are classed by maximum use voltage under EN 60903 / ASTM D120: Class 00 up to 500 V AC, Class 0 up to 1,000 V, Class 1 up to 7,500 V, Class 2 up to 17,000 V, Class 3 up to 26,500 V and Class 4 up to 36,000 V AC. They are normally worn under leather protector gloves and need periodic electrical testing. FYIND lists electricians' gloves (size 10 in, 290 g) from Abu Dhabi Hardware Company WLL; the listing does not state a voltage class, so confirm whether it is a rated insulating glove or a general electrician's work glove.
Disposable nitrile gloves (listed in blue, 1,000-piece boxes) protect against light contamination, not against sharp tools or strong chemicals. Specialty options include anti-cut and anti-vibration gloves such as the Eyevex SAVG 9000 (7 gauge; cotton, nylon and chloroprene rubber) and freezer gloves. Match the specialty glove to the hazard and ask for the relevant standard, for example EN 511 for cold and EN ISO 10819 for vibration.
Handling sheet metal, glass or blades? Choose a cut-rated glove and read the EN 388 letter or ANSI level. Handling oils, solvents or acids? Choose an EN ISO 374-1 chemical glove and check the permeation data for your chemical. Welding or hot metal? Choose EN 12477 and EN 407. Live electrical work? Choose a voltage-class rubber glove with a current test certificate. General packing, assembly or light site work? A PU or nitrile-coated knit glove is usually enough. Whichever you choose, give the supplier the hazard, material being handled, size range, quantity and the standard your site audit expects.
The marking printed on a glove tells you what it was actually tested for. A typical current mechanical marking reads like 4X43CP: abrasion 4, coup cut X (not applicable), tear 4, puncture 3, ISO 13997 cut level C, impact protection P. The rating grid and CE mark should be physically printed on the glove, and FYIND's guide advises requesting a technical data sheet and CE document with every quotation.
| EN 388:2016+A1:2018 Position | What It Tests | Scale |
|---|---|---|
| 1 | Abrasion resistance | Levels 1-4 (100, 500, 2,000 and 8,000 cycles) |
| 2 | Blade cut (coup test) | Levels 1-5, or X where the coup test is not applicable |
| 3 | Tear resistance | Levels 1-4 (10, 25, 50 and 75 N) |
| 4 | Puncture resistance | Levels 1-4 (20, 60, 100 and 150 N) |
| 5 | ISO 13997 (TDM) cut resistance | Letters A-F (A about 2 N up to F about 30 N) |
| 6 | Impact protection (optional) | P if passed; absent means no impact claim |
| EN 388 Cut Letter | Cutting Force (ISO 13997) | Approx. ANSI/ISEA 105 Level | Approx. Grams |
|---|---|---|---|
| A | about 2 N and above | A1 | 200-499 g |
| B | about 5 N and above | A2 | 500-999 g |
| C | about 10 N and above | A3 | 1,000-1,499 g |
| D | about 15 N and above | A4 | 1,500-2,199 g |
| E | about 22 N and above | A5 | 2,200-2,999 g |
| F | about 30 N and above | A6-A9 | 3,000 g and above (A9 is 6,000 g+) |
Buyer tip: EN 388 stops at F, so ANSI levels A6 to A9 all read as F on an EN glove - the ANSI scale runs higher. Gloves marked only to the older EN 388:2003 (no cut letter) are out of date; the 2016 version has been required for products sold in Europe since April 2019.
| Standard | What It Covers | What to Check |
|---|---|---|
| EN ISO 21420 | General requirements: sizing, labelling, instructions | Size marking, pictograms and instructions for use |
| EN ISO 374-1 | Chemical protection (Types A, B, C) | Type, listed test-chemical letters and breakthrough data |
| EN 407 | Thermal risks: contact heat, flammability, convective and radiant heat, molten-metal splash | Six-digit rating and the levels that matter for your task |
| EN 12477 | Welders' gloves, Types A and B | Type, plus EN 388 and EN 407 minimum levels |
| EN 511 | Protection against cold | Cold-resistance levels for freezer or outdoor use |
| EN 60903 / ASTM D120 | Live-working rubber insulating gloves, Class 00-4 | Class, size, test date and certificate |
Sources: PIP and Westchester EN 388:2016 conversion tables; WC Safety and BAC Tactical EN 388 vs ANSI/ISEA 105 guides; Uvex safety glove standards guide; SBE Direct EN 388 guide; FYIND safety glove directory. Figures are typical standard values - always confirm against the certificate for the specific glove.
Understanding what a glove is made of helps you read a quote and see why two gloves at different prices are not equivalent.
Size, gauge and pack size are where quotes most often drift apart. Use these guides to compare like with like.
| Gauge | Liner | Typical Use |
|---|---|---|
| 7 gauge | Thick, heavy knit | Cold work, anti-vibration, heavy handling (for example the Eyevex SAVG 9000 listing) |
| 10 gauge | Medium-heavy knit | General handling and construction work |
| 13 gauge | Fine knit | Precision assembly and cut-resistant liners (13-gauge HPPE liners are commonly listed) |
| 15-18 gauge | Very fine knit | High-dexterity light assembly |
| Glove Size (EN ISO 21420) | Typical Letter Size | Notes |
|---|---|---|
| 6-7 | XS-S | Smaller hands |
| 8 | M | Common medium |
| 9 | L | Common large |
| 10-11 | XL-XXL | Listings quoting "size 10" usually mean XL |
Pack-size tip: compare price per pair, not per pack. Listings show 12 pairs to a dozen, an inner pack of 12 with an outer carton of 600 (unit not stated on the listing - confirm pairs or pieces), a 25-dozen pack (300 pairs) of cotton gloves, 12-piece and 10-piece packs of leather gloves, and 1,000-piece boxes of disposables. A pack that looks cheaper may simply hold fewer gloves.
Al Badr Al Tamam Hardware Trading lists WFENG latex-coated safety gloves through its FYIND digital store. The available product listings include five model references: WF13065, WF13066, WF13067, WF13068 and WF13069. All five listings show size 10, with inner quantities of 12 pairs or units as listed and outer carton quantities of either 480 or 600. Buyers sourcing hand protection for construction, maintenance, workshops and general material handling can enquire about the individual models, coating details, packaging and bulk pricing.
| Product Model | Listed Size | Inner Quantity | Outer Quantity |
|---|---|---|---|
| WF13065 | 10 | 12 | 480 |
| WF13066 | 10 | 12 | 480 |
| WF13067 | 10 | 12 | 600 |
| WF13068 | 10 | 12 | 600 |
| WF13069 | 10 | 12 | 600 |
Note: The quantities above reproduce the supplier listing fields. Confirm whether they refer to pairs, individual gloves, inner packs or outer cartons before placing a bulk order.
Supplier: Al Badr Al Tamam Hardware Trading
Location: Sharjah, UAE
Brand: WFENG
Product Category: Latex-Coated Safety Gloves
Phone: +971 58 910 9077
Mobile: +971 50 763 1225
Looking for latex-coated safety gloves in Sharjah or elsewhere in the UAE? Contact Al Badr Al Tamam Hardware Trading to enquire about WFENG WF13065, WF13066, WF13067, WF13068 and WF13069. Include your required model, size, quantity and delivery location to help the supplier respond with relevant availability and pricing.
Product listing: WF13065 |
WF13066 |
WF13067 |
WF13068 |
WF13069
Supplier profile: Al Badr Al Tamam Hardware Trading – FYIND
Safatco Trading LLC lists Vaultex and Honeywell safety gloves on its FYIND storefront for buyers sourcing hand protection for construction, maintenance, workshops and general material handling. The visible range includes half latex-coated crinkle-finish gloves and black knitted gloves. Buyers can enquire about the exact model, fit, coating, packaging and protection specifications before selecting gloves for their workplace.
| Product / Model | Listed Specifications | Buyer Considerations |
|---|---|---|
| Vaultex Half Latex Coated Crinkle Finish Gloves | 10 inch; blue and yellow; Vaultex brand | Confirm coating coverage, liner material, size suitability and grip performance for the intended task. |
| Honeywell TNA2232272 Black Polyamide Knitted Gloves | Black; 13 gauge; 24.5 cm length; model TNA2232272; origin listed as UAE | Verify the coating, available sizes, mechanical protection rating and intended applications. |
| Honeywell Polytril Air Gloves, Black | Black; 24.5 cm length; packaging listed as 10 pcs/packet | Confirm the exact model, size range, coating details and whether the listed quantity refers to individual gloves or pairs. |
Supplier: Safatco Trading LLC
Location: Dubai, UAE
Brands listed: Vaultex and Honeywell
Telephone: +971 4 227 1749
Looking for industrial safety gloves in Dubai? Contact Safatco Trading LLC to enquire about Vaultex half latex-coated crinkle-finish gloves and Honeywell knitted gloves. Share your required model, size, quantity and application to help confirm suitability, availability and pricing.
Supplier Profile: View Safatco Trading LLC on FYIND
Safe Tag Fire Fighting and Safety Equipment Trading LLC supplies a range of personal protective equipment through its online catalogue. Its hand protection range includes cut-resistant gloves, latex-coated work gloves, nitrile and chemical-resistant gloves, leather welding gloves, rigger gloves and knitted grip gloves. Buyers can explore products from brands such as Ansell, Ameriza, American Safety, DPL, Vaultex, Honeywell, SHOWA, Uken, Workland and Eyevex, subject to individual product availability. The range supports procurement for construction, fabrication, industrial maintenance, warehousing and other workplaces that require task-specific hand protection.
| Brand | Listed Product Examples | Features and Specifications |
|---|---|---|
| DPL | Viking Thermo A6 Coated Gloves | Listed cut resistance level A6/F; Kevlar and aramid-steel liner construction; sizes 8, 9, 10, 11 and 12. |
| Vaultex | ENH Latex Coated Gloves | Grey knitted shell with blue half-latex coating and crinkle finish; flexible construction, breathable elastic wristband and anti-slip grip. |
| Uken | U5003 Black Grip Gloves | 13-gauge polyester shell, PVC coating, flexible construction and antistatic properties as listed by the supplier; intended for electronic and precision-instrument assembly. |
| Ansell | AlphaTec and TouchNTuff gloves | Selected models include nitrile chemical-splash protection, chemical-resistant gloves and flock-lined latex gloves. Protection and compatibility vary by model. |
| Ameriza | Leather welding gloves and rigger gloves | The listed range includes welted seams, Kevlar-stitched welding gloves, leather rigger gloves and driver gloves. |
| American Safety | TIG welding gloves and split-leather welding gloves | Options for welding-related hand protection; confirm the applicable heat, abrasion and mechanical protection ratings for each model. |
Product specifications above refer to selected models in Safe Tag's catalogue and are not applicable to every glove sold under the same brand. Confirm current stock, model numbers and manufacturer documentation before ordering.
Selecting industrial safety gloves requires more than checking the brand or material. Buyers should confirm the product's technical specifications and ensure they match the workplace risk assessment.
Businesses purchasing safety gloves in bulk can enquire about available brands, model references, size ranges, pack quantities and volume pricing. For a more accurate quotation, specify the glove type, required protection level, quantity, delivery location and intended application. Confirm availability, lead time and applicable documentation with Safe Tag before placing an order.
Supplier: Safe Tag Fire Fighting and Safety Equipment Trading LLC
Location: Al Karama, Dubai, UAE
Brands: Ansell, Ameriza, American Safety, DPL, Vaultex, Honeywell, SHOWA, Uken, Workland and Eyevex, among others
Telephone: +971 4 323 5419
WhatsApp: +971 54 449 5239
Looking for safety gloves in Dubai or elsewhere in the UAE? Contact Safe Tag to enquire about cut-resistant gloves, latex-coated grip gloves, chemical-resistant gloves, welding gloves and other industrial hand protection. Share your required brand, model, size, quantity and workplace application to obtain a relevant quotation.
FYIND Supplier Profile: View Profile
Maintive offers a broad selection of safety and jobsite gloves through its online store, including DEWALT, IRWIN and ANSELL models. Its range covers general-purpose work gloves, cut-resistant and impact-protection gloves, nitrile-coated handling gloves and chemical-resistant hand protection. Product specifications vary by model, so buyers should confirm the required protection level and suitability for their application before ordering.
| Brand & Product | Listed Features & Specifications | Potential Applications |
|---|---|---|
| DEWALT DPG250L Vibration Absorption Leather Gloves | Leather construction; model DPG250L; six-month warranty | Suitable applications should be confirmed against the manufacturer's product information. |
| DEWALT DPG31L Premium Driver Elastic Gloves | Elastic material; sizes M, L and XL; model DPG31L; six-month warranty | Driver and general handling tasks, subject to product suitability. |
| IRWIN Heavy Duty Jobsite Gloves | Model 10503827; X-Large | Jobsite work and material handling, subject to the product's protection specifications. |
| ANSELL EDGE 48-126 Industrial Gloves | Knitted polyester liner; black polyurethane coating; 15-gauge construction; size 9 and length of 215–270 mm listed on the product page. | Light-duty handling, small-part handling and assembly tasks. |
| ANSELL EDGE 48-128 Nitrile-Coated Gloves | Knitted polyester liner; black nitrile coating; 13-gauge construction; abrasion and oil resistance. | General handling, packaging, inspection and applications involving light oil exposure. |
| ANSELL RINGERS R065 Cut-Resistant Gloves | HPPE liner; knitted construction; sandy nitrile palm; TPR impact-protection features; touchscreen-compatible fingertips. | Selected tasks involving sharp or rough components, tool handling and impact hazards, subject to the specified rating. |
| ANSELL HyFlex 11-840 Nitrile Foam-Coated Gloves | Nitrile foam coating; knitted nylon/spandex liner; 15-gauge construction; latex-free listing. | Small-part handling, assembly, logistics and other tasks requiring dexterity. |
| ANSELL AlphaTec Solvex 37-676 Chemical-Resistant Gloves | Nitrile compound; cotton-flocked lining; textured finish for grip; size 9 shown on the product page. | Chemical-handling applications after checking chemical compatibility and the applicable protection rating. |
Product details above are based on Maintive's published listings. Check current stock, model variants, sizes, warranty terms and applicable certification with the supplier before purchase.
Supplier: Maintive
Location: Dubai, UAE
Telephone: +971 4 802 9010
FYIND Supplier Profile: View Maintive on FYIND
Official Website: maintive.com
Mufaddal Raj Building Material Trading lists 36 safety-glove products on its FYIND storefront. The range includes Vaultex latex-coated, PU-coated, dotted and freezer gloves, Workland coated and cut-resistant gloves, Linepro electrical gloves, Armstrong latex-coated gloves and Miller latex-coated gloves. Buyers can enquire about suitable glove types, available sizes, stock and technical documentation for construction, industrial handling and maintenance requirements.
| Brand & Product | Listed Model / Specifications | Buyer Considerations |
|---|---|---|
| Vaultex Latex-Coated Gloves ENH | Sizes L and XL shown. | Confirm coating coverage, liner material, grip requirements and applicable protection ratings. |
| Vaultex PU-Coated Gloves NJD | Sizes M to XL shown. | Consider for handling tasks where dexterity and a suitable grip are important; verify the product datasheet. |
| Vaultex Dotted Gloves VDA / VDB / VDC / VDD | Multiple dotted-glove variants are listed. | Confirm the exact variant, material, dotted surface, available sizes and pack quantity. |
| Vaultex Double-Sided Dotted Gloves | Models include VS91 (L and XL), PKI (L and XL), CRD (L and XL) and UBY (XL). | Check both-side grip requirements, fit and intended handling application. |
| Vaultex Latex-Coated Freezer Gloves ENO | Sizes S to 2XL shown. | Ask for the specified temperature range and thermal-protection details before selecting gloves for cold environments. |
| Workland Cut D Nitrile Latex-Coated Gloves SAO | Sizes S to 2XL shown. | Request the exact EN 388 cut-resistance marking and test documentation for the selected model. |
| Workland Latex-Coated Gloves GIF / ALZ | GIF: XL; ALZ: XL shown. | Verify liner construction, coating coverage, size availability and abrasion resistance. |
| Armstrong KGP Latex-Coated Gloves | Size XL shown. | Confirm the liner, coating finish, fit and applicable mechanical-protection rating. |
| Miller HLL Latex-Coated Gloves | Size XL shown. | Ask about available sizes, pack quantities and the model's intended application. |
| Linepro Electrical Gloves | TUE, MON and FRI variants listed at 36 cm. | Confirm the glove's voltage class, applicable electrical-safety standard, test date and certification before electrical work. |
The supplier's FYIND listings also include Vaultex safety spectacles, safety shoes and other building-material and hardware products, making it worth enquiring about multiple site-supply requirements together.
Supplier: Mufaddal Raj Building Material Trading
Location: Ajman, UAE
Mobile: +971 52 653 3053
FYIND Supplier Profile: View Supplier Profile
Official Website: mrbuildingmaterials.com
Abu Dhabi Hardware Company WLL lists electricians' gloves on FYIND in three size variants: 98 65 40, 98 65 41 and 98 65 42. The listings specify glove size and product weight, making it easier for buyers to identify the required variant. Electrical insulation rating, material composition and certification are not established by the visible listing details, so request the manufacturer's datasheet before selecting gloves for electrical work.
| Product | Listed Specifications | Buyer Verification |
|---|---|---|
| Electricians' Gloves 98 65 40 | Size: 9 in Weight: 281 g |
Confirm material, intended use, electrical rating and available certification. |
| Electricians' Gloves 98 65 41 | Size: 10 in Weight: 290 g |
Verify the voltage class, applicable standard and test documentation before use. |
| Electricians' Gloves 98 65 42 | Size: 11 in Weight: 290 g |
Check fit, stock availability, electrical protection rating and inspection requirements. |
For electrical work, do not assume that a glove is electrically insulating based on its product name or appearance. Confirm its rating and suitability for the actual electrical hazard before use.
Supplier: Abu Dhabi Hardware Company WLL
Location: Abu Dhabi, UAE
Telephone: +971 2 554 8890
FYIND Product: Electricians' Gloves
Supplier Profile: View Abu Dhabi Hardware Company WLL on FYIND
Safex Safety supplies personal protective equipment and lists several types of gloves on its FYIND storefront. The visible listings include dotted gloves, cut-resistant gloves, vinyl-coated gloves and Olympia double-palm working gloves. Its wider PPE range includes safety shoes, helmets, vests, disposable coveralls, respiratory protection and fall-protection equipment. Buyers can enquire about glove availability, sizes, materials and technical documentation for their workplace requirements.
| Product | Visible Listing Details | Buyer Considerations |
|---|---|---|
| Dotted Gloves Pakistan | Dotted palm-and-finger design; blue-and-white appearance. | Confirm liner material, dot coating, available sizes and grip performance. |
| Cut Resistant Gloves | Knitted-looking glove with a dark coated palm and grey back. | Request the exact EN 388 cut-resistance marking or applicable ANSI/ISEA rating. |
| Vinyl Coated Gloves | Light-coloured gloves listed under vinyl-coated gloves. | Confirm coating composition, liner, intended use and resistance limitations. |
| Working Gloves Double Palm Olympia (India) | Brand: Olympia; double-palm working glove design. | Ask about palm reinforcement, leather type, sizes and abrasion-resistance documentation. |
| Welding Gloves Red With Piping | Listed product; red glove with piping. | Confirm leather type, cuff length, lining and EN 12477 and EN 407 ratings, where applicable. |
Safex Safety's listed product range also includes safety shoes, safety helmets, safety vests, 40 GSM non-woven disposable coveralls, a 3M 6800 full-face mask, fire extinguishers and fall-arrester wire-rope lifelines listed in lengths of 10–30 m. Buyers should verify the specifications and availability of each item before ordering.
Supplier: Safex Safety
Location: Abu Dhabi, UAE
Telephone: +971 2 583 2284
FYIND Supplier Profile: View Safex Safety on FYIND
FYIND Product: Welding Gloves Red With Piping
A glove is described as cut-resistant but carries no EN 388 cut letter or ANSI level, so the claim cannot be verified and the glove can fail a site audit. Fix: ask for the rating grid and CE mark to be physically printed on the glove, and request a technical data sheet and test certificate with every quotation.
Buyers read the second digit (coup cut, 1-5) as the cut level, or assume EN 'F' equals ANSI 'A9'. A glove marked 4X43C has no coup rating (X) and a TDM cut level C, roughly ANSI A3; and because EN stops at F, ANSI A6-A9 all read F. Fix: specify the cut requirement by the fifth-position letter or ANSI level, and use the conversion table above.
A general PU or nitrile-coated knit glove, or a thin disposable nitrile glove, is used with solvents or acids. Without an EN ISO 374-1 mark and permeation data for the specific chemical, breakthrough can happen quickly and unnoticed. Fix: choose a Type A, B or C chemical glove matched to the chemical, and check the manufacturer's breakthrough times.
Some employers expect workers to buy their own gloves or deduct the cost. UAE rules state that employees are entitled to complimentary PPE appropriate to the task, and employers must provide a safe working environment under Federal Decree-Law No. 33 of 2021. Fix: budget PPE as an employer cost, set up supply agreements for ongoing replenishment and keep issue records.
One supplier quotes per dozen, another per pack of 10 or 12, another per carton of 600, and disposables per 1,000 pieces; listings do not always say whether quantities are pairs or pieces. Fix: convert every quote to price per pair, and confirm in writing whether the stated quantity is pairs or pieces.
A glove described as an electrician's glove is used on live equipment without a stated EN 60903 / ASTM D120 class, size marking or test certificate. A glove for general electrical trade work is not necessarily rated for live-line protection. Fix: specify the class for your working voltage, wear leather protector gloves over rubber insulating gloves, and keep test dates and periodic retest records.
Several suppliers list gloves among power tools, hardware or building materials. That can be convenient, but stock depth, certificates and rating information may be thinner than at a specialist PPE dealer. Fix: ask which glove models are held in stock, request datasheets and certificates, and confirm quantities before relying on one supplier for a large or audited project.
UAE suppliers stock a mix of international brands, regional brands and private-label gloves. The brands below are those visible on the FYIND listings and storefronts of the suppliers in this guide: WFENG, Vaultex, Honeywell, DPL, Uken, Ansell, DEWALT, IRWIN, Ameriza, American Safety, Workland, Armstrong, Miller, Linepro, SHOWA, Eyevex and Olympia. Specifications refer to selected models and do not apply to every glove sold under the same brand, so model number, protection rating, size, certificate and current stock should always be confirmed with the supplier before ordering.
| Brand | Listed Models & Product Focus | Listed Specifications | Listed By | What Buyers Should Check |
|---|---|---|---|---|
| WFENG | Latex-coated safety gloves WF13065, WF13066, WF13067, WF13068, WF13069 | Size 10; inner quantity 12; outer quantity 480 (WF13065, WF13066) or 600 (WF13067-WF13069) | Al Badr Al Tamam Hardware Trading (Sharjah) | Coating coverage, liner material, and whether quantities are pairs or pieces |
| Vaultex | Half latex-coated crinkle-finish gloves; ENH latex-coated; NJD PU-coated; dotted VDA / VDB / VDC / VDD; double-sided dotted VS91, PKI, CRD, UBY; ENO latex-coated freezer gloves | 10 in, blue and yellow (half latex-coated); ENH: grey knitted shell, blue half-latex coating, crinkle finish, elastic wristband, anti-slip grip; sizes L-XL (ENH), M-XL (NJD), S-2XL (ENO) | Safatco (Dubai); Safe Tag (Dubai); Mufaddal Raj (Ajman) | Coating coverage, liner and size availability; temperature rating of the ENO freezer glove before cold-room use |
| Honeywell | TNA2232272 black polyamide knitted gloves; Polytril Air gloves, black | TNA2232272: 13 gauge, 24.5 cm, origin listed as UAE; Polytril Air: 24.5 cm, 10 pcs per packet | Safatco (Dubai) | Coating, sizes, mechanical rating, and whether the 10 pcs are pairs or single gloves |
| DPL | Viking Thermo A6 coated gloves | Cut level listed as A6/F; Kevlar and aramid-steel liner; sizes 8, 9, 10, 11 and 12 | Safe Tag (Dubai) | EN 388 certificate for the exact model and the ANSI/ISEA cut level |
| Uken | U5003 black grip gloves | 13-gauge polyester shell; PVC coating; antistatic properties as listed; for electronic and precision-instrument assembly | Safe Tag (Dubai) | Antistatic test standard and performance data before use in ESD-controlled areas |
| Ansell | AlphaTec and TouchNTuff gloves; EDGE 48-126; EDGE 48-128; RINGERS R065; HyFlex 11-840; AlphaTec Solvex 37-676; AlphaTec 58-535B (FYIND listing) | EDGE 48-126: 15-gauge polyester liner, black PU coating, size 9; EDGE 48-128: 13-gauge, black nitrile; RINGERS R065: HPPE liner, sandy nitrile palm, TPR impact protection, touchscreen fingertips; HyFlex 11-840: nitrile foam, nylon/spandex liner, 15-gauge, latex-free listing; Solvex 37-676: nitrile, cotton-flocked, textured, size 9; 58-535B: textured grey nitrile, 13.38-13.7 in | Maintive (Dubai); Safe Tag (Dubai) | Ratings are model-specific: EN 388 digits (including R065 cut and impact) and EN ISO 374-1 type with chemical data for AlphaTec models |
| DEWALT | DPG250L vibration absorption leather gloves; DPG31L premium driver elastic gloves | DPG250L: leather construction; DPG31L: elastic material, sizes M, L, XL; six-month warranty on both | Maintive (Dubai) | Warranty terms; for the vibration claim, ask for the test standard (for example EN ISO 10819) |
| IRWIN | Heavy Duty Jobsite Gloves, model 10503827 | Size X-Large | Maintive (Dubai) | Protection specification and available size range |
| Ameriza | Leather welding gloves, leather rigger gloves and driver gloves | Welted seams; Kevlar-stitched welding gloves | Safe Tag (Dubai) | EN 12477 type, EN 407 levels and EN 388 digits for the exact model |
| American Safety | TIG welding gloves; split-leather welding gloves | Welding-related hand protection | Safe Tag (Dubai) | Applicable heat, abrasion and mechanical protection ratings for each model |
| Workland | Cut D nitrile latex-coated gloves SAO; latex-coated gloves GIF and ALZ | SAO: sizes S to 2XL; GIF and ALZ: XL | Safe Tag (brand listed); Mufaddal Raj (Ajman, models listed) | EN 388 marking and the test documentation behind the cut D claim |
| Armstrong / Miller | Armstrong KGP latex-coated gloves; Miller HLL latex-coated gloves | Size XL listed for both | Mufaddal Raj (Ajman) | Liner, coating finish, mechanical rating and pack quantities |
| Linepro | Electrical gloves TUE, MON and FRI | 36 cm length listed | Mufaddal Raj (Ajman) | Voltage class, applicable standard, test date and certificate before any live work |
| SHOWA | Brand listed in Safe Tag's glove catalogue | Model details not shown on the listing reviewed | Safe Tag (Dubai) | Exact model numbers and ratings |
| Eyevex | SAVG 9000 anti-cut, anti-vibration glove (FYIND listing); brand also listed by Safe Tag | 7 gauge; cotton, nylon and chloroprene rubber | Safe Tag (Dubai) | EN 388 cut level and EN ISO 10819 vibration rating |
| Olympia | Working gloves double palm Olympia (India); Super Olympia KG-101 cotton knitted glove (FYIND listing) | Double-palm design; KG-101: 10 in, natural white, 25-dozen pack | Safex Safety (Abu Dhabi); other FYIND suppliers | Palm reinforcement, leather type, sizes and abrasion documentation |
| Brand not stated | Dotted gloves, cut-resistant gloves, vinyl-coated gloves and red welding gloves with piping; electricians' gloves 98 65 40, 98 65 41 and 98 65 42 | Electricians' gloves: 9 in / 281 g, 10 in / 290 g, 11 in / 290 g; other items as listed | Safex Safety (Abu Dhabi); Abu Dhabi Hardware Company WLL (Abu Dhabi) | Manufacturer, datasheet and ratings; the electricians' glove listing does not establish an electrical insulation rating |
| Other FYIND-listed brands | Skeleton Nit 3; Milano double-palm leather; Rigger HG 1108; Veevex grey-grip nitrile | Nit 3: sizes 7-11, black; Milano: 12 pcs; HG 1108: 5.5 x 10.5 in, CE Cat II, EN 420, EN 388 (4244) | Other suppliers in the FYIND safety glove directory | Current EN ISO 21420 marking (EN 420 has been replaced) and EN 388 digits |
| Buyer Need | Recommended Product | Why |
|---|---|---|
| Packing, assembly and light handling | PU or nitrile-coated knit glove, 13 gauge | Light, dexterous grip at the lowest price per pair |
| Sheet metal, glass or blade handling | Cut-rated glove (EN 388 letter C-F / ANSI A3-A6+) | Liner yarn provides the cut protection |
| Oily or wet handling | Nitrile foam or sandy-coated glove | Grip in oil and wet conditions |
| Solvents, acids and cleaning chemicals | EN ISO 374-1 chemical glove (nitrile, neoprene or PVC) | Tested breakthrough time against listed chemicals |
| Welding, grinding and hot metal | EN 12477 / EN 407 split-leather welding glove | Heat, spark and spatter resistance |
| Live electrical work | Class-rated rubber insulating glove with leather protectors | Voltage-class protection with tested certificate |
| Rigging, construction and general heavy duty | Leather rigger or driver glove with EN 388 marking | Abrasion resistance and durability |
Planning your budget? The table below gives indicative UAE benchmarks. Prices for leather, chemical, welding and insulating gloves vary too widely by length, material, class and brand to quote responsibly - request an itemised quote for those.
| Product Format | Indicative UAE Price | Factors Affecting Price |
|---|---|---|
| General-use PU or nitrile-coated gloves | AED 1.30 - 4.80 per pair (FYIND guide) | Liner, coating, gauge, brand, pack size. |
| EN 388 cut-resistant gloves | AED 8.50 - 28 per pair (FYIND guide) | Cut grade, liner yarn, coating, brand. |
| UAE retailer listing examples (not FYIND) | Cut level 3 about AED 10; cut level 5 about AED 15; nitrile-coated knitted about AED 2.00 | Retail pack size and brand; shown for reference only. |
| Leather, chemical, welding, insulating and disposable gloves | Price on request | Material, length, class or type, certificate, brand and quantity. |
Disclaimer: Prices shown are indicative UAE benchmarks from FYIND's safety glove guide and one retailer's public listings, for buyer guidance only, and are not quotations from the suppliers listed above. Actual quotations vary by supplier, rating, material, size and quantity, and VAT and delivery may apply.
Safety gloves are usually bought alongside other hand-protection and PPE categories for UAE sites.
What is the best safety glove for cut protection in the UAE?
It depends on the job. Choose by the rating printed on the glove: an EN 388 cut letter (A-F) or an ANSI/ISEA 105 level (A1-A9). Light edges suit A1-A3, sheet metal and packaging blades suit mid levels, and heavy blade or glass work needs the higher groups. FYIND notes local suppliers stock ANSI cut grades A3-A8.
What does EN 388 4X43CP mean?
Abrasion level 4, coup cut X (not applicable), tear level 4, puncture level 3, ISO 13997 TDM cut level C (about 10 N, roughly ANSI A3) and P for passed impact protection. Higher digits mean higher protection.
What is the difference between EN 388 cut letters and ANSI cut levels?
Both come from the same type of blade-cut test, reported in newtons (EN 388, letters A-F) or grams (ANSI/ISEA 105, levels A1-A9). EN stops at F, so ANSI levels A6 to A9 all read as F on an EN glove.
Are nitrile-coated gloves chemical resistant?
Not necessarily. A nitrile-coated knit glove improves oil and wet grip but is not automatically tested for chemicals, and thin disposable nitrile gloves give only light splash protection. For chemicals, look for the EN ISO 374-1 mark (Type A, B or C) and check the breakthrough data for your chemical.
What gloves do I need for welding?
Welding gloves tested to EN 12477 (Type A for heavier processes, Type B where more dexterity is needed, such as TIG) with an EN 407 heat rating. Check cuff length and lining, because a leather glove with no heat rating is not a welding glove.
Which gloves are suitable for electrical work?
Live electrical work needs rubber insulating gloves rated by voltage class under EN 60903 or ASTM D120 (Class 00 to 4), normally worn under leather protector gloves and tested periodically. A general electrician's work glove is not necessarily a rated insulating glove, so confirm the class and test certificate.
Does UAE law require employers to provide safety gloves?
Yes. MOHRE's Administrative Decision No. 19 of 2023 states that employees are entitled to complimentary personal protective equipment appropriate to the task, and Federal Decree-Law No. 33 of 2021 requires employers to provide a safe working environment. Abu Dhabi's OSHAD and Dubai Municipality add further requirements for sites in those emirates.
How much do safety gloves cost in the UAE?
FYIND's UAE guide gives indicative benchmarks of about AED 1.30-4.80 per pair for general-use PU or nitrile gloves and AED 8.50-28 per pair for EN 388 cut-resistant gloves. Leather, chemical, welding and insulating gloves vary by type and rating - request an itemised quote.
What glove size do I need?
Gloves are sized under EN ISO 21420 from 6 to 11, typically 7 = S, 8 = M, 9 = L, 10 = XL and 11 = XXL. Listings quoting size 10 usually mean XL. A fit that is slightly snug on a cold day can become tight in UAE heat, so offer sizing sets to crews.
What glove gauge should I choose?
Gauge describes how fine the knit is. Lower gauge (7-10) is thicker and more durable; higher gauge (13-18) is thinner with more dexterity. Many cut-resistant liners are 13 gauge.
Can I get samples and bulk or private-label gloves in the UAE?
FYIND's guide notes most PPE suppliers provide sample packs, offer bulk or contract pricing above a few hundred to a couple of thousand pairs, and that private-label production is typically available only at large minimums (around 10,000 pairs per model). Confirm terms with each supplier.
Where can I buy safety gloves in Dubai, Sharjah, Ajman and Abu Dhabi?
Suppliers listed on FYIND include Safatco Trading LLC, Safe Tag Fire Fighting and Safety Equipment Trading LLC and Maintive in Dubai, Al Badr Al Tamam Hardware Trading in Sharjah, Mufaddal Raj Building Material Trading in Ajman, and Abu Dhabi Hardware Company WLL and Safex Safety in Abu Dhabi. Confirm stock, ratings and certificates directly before ordering.
0 